LUBO non-wrapping screens part of City of Pheonix MRF upgrade
New screens and extra-wide TOMRA optical sorters added at Republic Services North Gateway facility, on road to 40-percent diversion goals
Like many cities, Phoenix, Arizona and its surrounding communities were hit hard by China's 2018 ban on many previously recycled goods. With an aging system at its North Gateway Material Recovery Facility (MRF), the city recently set out to improve its plant's technology with a retrofit project to better handle the changing material stream and improve the quality of its recycled materials.
With a goal to achieve a 40% waste diversion rate by the end of 2020, and become a zero-waste city by 2050, Phoenix believed that a retrofit project for its MRF was one of the essential components needed to reach these diversion goals. It's the kind of investment that would increase the recovery rate of valuable, quality recyclable materials, and create a more efficient sorting system.
The North Gateway MRF, operated by Republic Services,was seeing problems with its traditional screening package. Its ONP screens were prone to getting wrapped up with stringy materials (namely plastic film bags, which have become a bane to sorting facilities nation-wide). Such materials wind their way around these screen shafts until the entire function of the screen is compromised. Containers that are supposed to bounce backward off the screen end up riding over it along with the fiber material they are meant to be separated from.
To combat this issue, the city and Republic took the initiative to upgrade the facility and replaced three of these old-styled ONP screens with two newer Non-Wrapping ONP screens. The non-wrapping screens have specially designed stars and shafts that do not allow problematic materials to wrap around them. As a result, separation performance stays high over many shifts and the plant does not waste production time stopping the screens and hand-cutting the contamination like film, rope and other wrappables from the shafts.
With the overs of the ONP screens being primarily 2D materials of mid to larger sized ONP, OCC, Mix and some Film, head count was reduced with a much improved fiber quality. To better process the remaining 3D stream of containers and smaller paper fraction, the site added an extra wide TOMRA optical sorter to detect and positively eject the good SOP and mixed paper fraction out of this stream. Sorting out paper in a positive sort, assures only high quality fiber to be recovered and to unload the burden to the ballistic separator for effective 3D container cleanup.
The facility also replaced a polishing screen with a new elliptical screen (or ballistic separator). Paddles rotating in an elliptical motion scalp off the last bit of 2D film, textiles and dirty fiber from the container stream. Because of its unique design, the elliptical screen is very low maintenance. It also is wrap-resistant and does not require frequent replacement of wear parts.
A second extra wide optical sorter was added to effectively recover the increased PET volume prior to the existing container line—it is much more efficient and was able to recover double the amount of PET compared to the older model it replaced.
Rick Peters, Phoenix Public Works deputy director over the Diversion and Disposal Division, was more than satisfied with the results, "Not only is the expansion living up to our expectations, but the timeframe in which it was completed was remarkably quick. Working closely with Republic and VDRS enabled us to upgrade the facility with less than 3 months of downtime and all was operational just ahead of the Christmas season. Republic's and Van Dyk's team, designed, constructed and installed all in less than 9 months".
In all, the system improvements enabled a processing of more material with fewer hand-sorters, improving recovery of fiber and containers. System throughput has increased from 18-20 tons/hour to 28-30 tons/hour, allowing the operating hours to go down to a single shift and opening the possibility of trucking in loads from other Phoenix locations.
360 Dr. Martin Luther King Jr. Drive
875 Embarcadero Drive
West Sacramento, CA
More from Paper Recycling
Single-Ram and II-Ram High-Capacity Balers
At Machinex, we've been designing sorting systems for over 35 years, so we know how essential it is for MRF operators to have a baler they can trust and not worry about its operational reliability. This is why we design and manufacture reliable single-ram and II-ram high-capacity balers to specifically help optimize their operations.
Watch the video of our expert who presents the main features of Machinex balers delivering these important benefits:
- Easy & accessible maintenance
- Reduced maintenance & bale handling costs
- Energy savings
- Optimal bale density
For C&D recyclers, waste haulers, demolition contractors and landfills, there is a growing opportunity to profit from rethinking processes. Although every operation is different, by streamlining the front end of the C&D operation processes with purpose-built technologies, recyclers can tap into new end markets, accommodate higher material volumes, stay ahead of regulatory restrictions, increase recovery rates and add commodity revenue, while decreasing labor and other costs.
Download the new eBook to learn about:
- Finding opportunities in the alternative to landfilling C&D
- How facilities can increase their profits from C&D
- Using the right C&D processing technology in the right locations