Recycling Product News Logo

​KOBELCO shows off latest demolition excavators and car demolisher

Specialty machines debuted at year's largest equipment exposition

The 220,000-pound KOBELCO SK1000DLC Large Building Demolition machine offers flexibility with a variety of attachments for job-specific strength and reach capabilities.
The 220,000-pound KOBELCO SK1000DLC Large Building Demolition machine offers flexibility with a variety of attachments for job-specific strength and reach capabilities.

At CONEXPO-CON/AGG 2017 this past March KOBELCO Construction Machinery says they hosted their dealer network members along with thousands of attendees at their exhibit, where they displayed the company’s latest advancements, exclusive technologies, several new and specialty excavator models and configurations, including the the SK1000DLC large building demolition machine, and debut of the SK210D-10 Car Demolition Machine and SK350DLC-10 Building Demolition excavator.

The KOBELCO SK210D Car Demolisher is designed to take apart vehicle bodies, engines, and other metal components with precise, safe, and efficient operation. The demo unit at CONEXPO 2017 was equipped with the KOBELCO Innovation Clamp Arm, which features a bowl-shaped grip and powerful cutting teeth, to enable efficient bending, breaking and tearing.

Two specialized crushers also allow the SK210D to tackle different dismantling tasks. The multi-dismantling crusher is suited for small-scale separating and sorting of various metal products, including small parts such as electrical fittings and harnesses. The optional vehicle-dismantling crusher offers a powerful grab, increased cutting force and rotational torque powerful enough to cut through a chassis and frame.

The KOBELCO SK210D offers a powerful and practical solution to nearly any demolition or dismantling task through the use of rugged design, a comfortable operator cab and controls, energy-efficient hydraulic system and Tier IV Final engine and hydraulic system.

The Tier IV Final KOBELCO SK350DLC Building Demolition excavator is engineered with practical features to increase jobsite productivity and reduce downtime.
A common-use main boom allows two attachments on the SK350DLC to be easily interchanged, including an ultra-long crusher attachment that enables the SK350DLC to demolish buildings up to seven stories high from the ground, and a 3-ton large front crusher that can be added to the ultra-long attachment for increased power and efficiency while demolishing high floors.

The SK350DLC also boasts the revolutionary KOBECLO NEXT joint system – each boom and attachment is designed with a block structure that simplifies assembly/disassembly for easy transportability. 

The 220,000-pound KOBELCO SK1000DLC Large Building Demolition machine offers flexibility with a variety of attachments for job-specific strength and reach capabilities. The available GD ultra-long attachment puts the priority on reaching high places, extending up to 13 stories high with a 2.5-ton crusher, while the the HD ultra-long attachment focuses on high-elevation crushing force with a 5-ton crusher and a reach of 100-feet. Additionally, a separate + insert boom attachment offers even more power with a large crusher that carries 150-tons of tip crushing force and a reach of 65-ft. and a separate boom attachment is built for compact operation, with a powerful crusher, advanced workability in confined spaces and superior lifting power near the ground.

The SK1000DLC also features an optional removable trans-lifter and stacking-type counterweight to assist with easier preparation for shipment. And, a dedicated 30° tilting cab presents operators with a safe line of sight and comfortable working posture.

The Tier IV Final KOBELCO SK350DLC Building Demolition excavator is engineered with practical features to increase jobsite productivity and reduce downtime.
The SK1000DLC Large Building Demolition machine features an available GD ultra-long attachment that puts the priority on reaching high places, extending up to 13 stories high with a 2.5-ton crusher, while the the HD ultra-long attachment focuses on high-elevation crushing force with a 5-ton crusher and a reach of 100-feet.

More from C&D Recycling

CBI introduces C400CT grinder and presents Frontline Machinery with Dealer of the Year award

Continental Biomass Industries (CBI) premiered the 6400CT Horizontal Grinder and Chipper at the 2019 Factory Forum in Newton, New Hampshire. The 6400CT processed steel contaminated railroad ties along with a mix of construction and demolition debris to headline the range of environmental equipment at the show.

Metso launches new Nordtrack mobile crushing and screening product range

Metso is expanding its mobile crushing and screening solutions offering for the aggregates industry with an extensive new product portfolio. The new Metso Nordtrack range introduces 19 products designed to meet the requirements of general contractors in particular. The first deliveries are expected to take place during the first quarter of 2020.

McCloskey acquisition by Metso completed

Metso's acquisition of McCloskey International, a Canadian mobile crushing and screening equipment manufacturer, has been successfully completed. With this acquisition, Metso expands its offering in the aggregates industry globally and strengthens its customer reach especially to the general contractor segment. The acquisition was completed on October 1, 2019.

Priestly Demolition uses Mantovanibenne combi cutter to tear down old Toronto SickKids building

When it comes to large scale demolition, Mantovanibenne's combination crushers are ideal tools for tackling reinforced concrete and metal structures. These Italian-made attachments incorporate characteristics of crushers and shears to deliver performance even in the toughest of situations. These crushers' performance comes from the powerful cylinders and the twin pin system that contribute to the breaking and cutting force. The jaws incorporate sharp shear shaped blades that guide the cutting power to be executed in a clean controllable manner for the operator.

Rotochopper hosts 9th annual Demo Day

Rotochopper hosted customers and prospects from around the world at their 9th Annual Demo Day event held September 12th at the company's headquarters in St. Martin, Minnesota. The Rotochopper team and over 200 guests were not hampered by the inclement weather this year, with the schedule of machine demos, factory tours, educational sessions and networking filling the day. The event was organized around the theme "Partnership Through Innovation", which is a key value of the work that Rotochopper does every day.

Thompson Recycle Company slashes fuel and maintenance costs, minimizes downtime with Volvo Penta-powered generators

Thompson Recycle Company reprocesses mountains of used asphalt rubble every year with its three mobile crushing plants in Michigan. The mobile plants use generators as their prime power source at road construction sites. Since switching to Volvo Penta-powered 600 kWe generators, they're saving hundreds of thousands of dollars per year in fuel and maintenance costs, not to mention less downtime.

Subscribe to our free newsletter

Get our newsletter

Learn more

Multitasking Sennebogen material handler is right toolkit for urban dismantling projects

After ten years of seeing the former Wangler furniture store stand vacant, local residents in Regensburg, Germany were pleased to see a crew from Metz GmbH arrive to tear down the building. At the center of the jobsite is a SENNEBOGEN 830 R-HDD E Series material handler fitted with a variety of attachments to bring down and extract the material, sort it and load it for on-site crushing.

Powerscreen adding Premiertrak 330 to jaw crusher range

Powerscreen is adding the Powerscreen Premiertrak 330 to its jaw crushing range. The new Premiertrak 330 is fitted with a simple, large fixed hopper improving setup time, reducing pegging and increasing the life of wear parts. The hydrostatic drive allows reversibility of the chamber, meaning the machine can unblock and run in reverse, allowing easier crushing of certain materials. In addition to this, a low engine speed improves fuel consumption and provides lower noise emissions for working in urban or restricted areas.

ShearCore's Fortress Cracker does double duty taking on primary and secondary demolition

ShearCore's Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.
• Narrow Stick body for improved visibility.
• Removable isolated bottom cover provides exceptional access to all serviceable components.
• Unique pin retention eliminates weld-on cylinder pin keeper.
• Tight blade clearances allow rebar to be processed throughout the entire jaw length.
• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.

First ZenRobotics AI-powered sorting system operational in California at Zanker Recycling

San Jose-based Zanker Recycling, a U.S. based specialist in construction and demolition (C&D) materials processing systems and recycling, in partnership with Plexus Recycling Technologies, the North American distributor of ZenRobotics, have announced that ZenRobotics' ZRR2 AI Robots are now officially operational at Zanker Recycling's San Jose site.

NPK demolition grabs efficient for sorting and recycling C&D waste

For use with excavators in the 11- to 44-ton range, these NPK grabs' high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.
• High tension, special wear steel.
• 360-degree hydraulic rotation.
• They have a wide jaw opening and offer high closing force.
• Fully encased, easily accessible hydraulic components.
• Adjustable rotation speed and opening/closing speed
• Interchangeable and reversible cutters.
• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.

Epiroc combi cutters serve up one-two crunch

These multi-purpose hydraulic attachments from Epiroc are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.
• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).
• Two powerful hydraulic cylinders deliver constant closing forces with short open-close cycle times.
• Low noise, low vibration.
• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.
• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.

NPK demolition tool crushes reinforced concrete with ease

For use with excavators in the 21 to 50 ton range, these attachments from NPK easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.
• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.
• Optional 360-degree power rotation for maximum versatility.
• NPK's exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.
• Bolt-on replaceable tooth plate on the movable jaw.
• "A" models also utilize bolt-on tooth plate on the fixed jaw.

Caterpillar multi-processors for a variety of specialized demolition tasks

These heavy-duty, high-production tools from Caterpillar accept multiple interchangeable jaws for a variety of specialized demolition tasks.
• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.
• Maximum crushing/cutting force is applied as soon as the jaw contacts material.
• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.
• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Superior and CMS Cepcor create partnership for crusher parts in North America

Superior Industries Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, says it has entered into a strategic partnership with Europe's largest manufacturer of aftermarket crusher parts. For 40-plus years, CMS Cepcor has manufactured premium crusher spares for more than three dozen active and classic brands throughout Europe. The parts manufacturer recently expanded its global footprint when it launched CMS Cepcor Americas.

Watch Priestly Demolition demolish underground parking garage in confined downtown Toronto

Priestly Demolition is known for its tricky takedowns of old infrastructure in Ontario. Watch the company demolish a city-block-sized underground parking garage on busy Bay Street in downtown Toronto. Challenges include limited space for machine storage and need to keep roads clear for children's hospital emergency vehicle access.

New location to double production capacity for Rockster

Continuous expansion, high quality standards as well as short delivery deadlines made such a step necessary for the manufacturer of mobile crushing and screening machinery, Kormann Rockster Recycler GmbH from Ennsdorf. The acquisition of a 10,000 m² property in Neumarkt im Mühlkreis (Upper Austria) promises to provide a strong and needed force in a continuous growth and market demand.

KINSHOFER P-series orange peel grapples handle heavier loads and increase efficiency

KINSHOFER offers an extensive range of excavator orange peel grapples for scrap, demolition, loading and unloading applications. Unlike competitive grapples, according to Kinshofer, the P-Series hydraulic system is fully enclosed and protected, reducing the risk of damage to hoses and other components. Additionally, the grapple's unique tine design enhances material penetration, increasing the amount contractors can safely secure in one cycle and saving time on the jobsite. 

Subscribe to our free newsletter

Get our newsletter

Learn more

Versatility and mobility: an in-depth report on impact crushers

Impact crushers have broad appeal across various sectors and for good reasons. Our panel of experts provides insight as to why this is, plus information on the dynamic market for impact crushers in Canada, their applications and advantages, customization and options, as well as what to consider when buying an impact crusher.

New Pitbull Grizzly screen an economical option for small- to mid-sized contractors

Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.

CDE latest intelligent plant using AI technology

At bauma 2019, CDE launched a new intelligent wet processing plant featuring the manufacturer's pioneering next generation technology. The new plant utilises advances in machine learning and the Internet of Things (IoT) to monitor and automate previously manual processes, for application in quarries, mines and recycling operations. Enabling the plant to make smart decisions in real time, this latest model can boost productivity by up to 40 percent with a payback period of under six months. (Based on outcome for a beta testing customer in Europe.)

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more