Recycling Product News Logo

New Trident from Buffalo Turbine provides triple-coverage dust control

Buffalo Turbine's new Trident dust control solution uses three separate turbines all powered by the same Kohler 74 horsepower diesel engine.
Buffalo Turbine's new Trident dust control solution uses three separate turbines all powered by the same Kohler 74 horsepower diesel engine.

Buffalo Turbine has introduced the Trident dust control solution. This system uses three separate turbines all powered by the same Kohler 74 horsepower diesel engine, capable of three times the coverage area compared to single turbine dust controllers. Different from other dust control units on the market, this unit is self-contained, meaning no generator is required, less maintenance costs, and less space required for setup.

According to Buffalo Turbine, each of the three turbines on the new Trident model uses their Gyratory Atomizing Nozzle technology, which does not clog like conventional nozzle tips. The Trident is available with one, two or three oscillation kits to match desired coverage in a wide range of applications, including composting and organics recycling, solid waste, C&D and scrap metal.

Each of the three turbines on the new Buffalo Turbine Trident uses their Gyratory Atomizing Nozzle technology, which does not clog like conventional nozzle tips.

More from Maintenance & Management

Continental introduces Generation 3 construction truck tires and digital tire monitoring solutions at Texas event

Heavy Equipment Guide and Recycling Product News attended a demo of Continental's construction and on/off-road tire portfolio at the company's proving grounds in Uvalde, Texas, in September. Demos ranged from a 19.5-inch medium-duty truck tire up to heavy truck tires and earthmoving OTR tires. The company also introduced its digital tire monitoring solutions.

Innovative Kleenvac turns any drum into a wet vacuum for industrial spills cleanup

Kleenvac, by Onekleen, is a tiny power packed vacuum device designed to save businesses hours in workshop and general cleanup time. This machine is a versatile compressed air powered vacuum that converts metal drums into supercharged wet vacs. It will solve liquid clean-up challenges in a range of applications simply and affordably. Kleenvac is a low-cost investement that will last, and will: 

  • Clean up liquids and suspended solids simpler and faster ("Fill a 200L drum in just over 1 minute"). 
  • Reduce manual labour and the use of expensive clean-up consumables, potentially saving $100s if not $1000s. 

Petro-Canada Lubricants introduces new heavy-duty and driveline oils

Petro-Canada Lubricants, a HollyFrontier business, has expanded its TRAXON and DURON product lines with the launches of DURON Advanced 5W-30 and TRAXON Synthetic 75W-85. The introduction of the new oils demonstrate continued product innovation from Petro-Canada Lubricants to help fleets meet new and emerging market trends.

LOOSE-N-IT 4-in-1 lubricant now available from LUBE-A-BOOM

The LUBE-A-BOOM team is proud to introduce LOOSE-N-IT. Customer service and satisfaction is LUBE-A-BOOM's top priority, along with providing dealers superior lubrication products. After speaking with several industry leaders, a lubrication niche not being adequately satisfied by competing brands was identified: a product that allows technicians and parts managers to quickly remove old, stripped, and/or rusty bolts from equipment. The LUBE-A-BOOM team found that many times these crucial bolts and screws had become so worn and stripped that removing them was a time-consuming process. To alleviate this service-related pressure point, LUBE-A-BOOM set to work to develop a product that could easily be used in the field to assist in the removal of old and worn bolts. Thus, the LOOSE-N-IT product came to fruition. 

Subscribe to our free newsletter

Get our newsletter

Learn more

Keeping your Eddy Current Separator up and running

The Eddy Current Separator (ECS) is one of the most important pieces of equipment in a recycling operation. For operators of MRFs, auto-shredders or e-scrap facilities, it's usually one of the biggest revenue generators. Keeping the ECS running is important to the recycler's bottom line, therefore it is essential to reduce unexpected downtime. 

MAXAM MS302 approved by Caterpillar as new OEM tire option

MAXAM Tire North America is pleased to announce that Caterpillar Inc. has validated and approved the MAXAM MS302 L3 tire for use on specific Cat ® Medium Wheel Loaders. The MAXAM 23.5R25 MS302 is currently available as a factory fitment option on Cat 950GC, 950L, 950M, 962L, and 962M in certain regions. Additional MAXAM MS302 tire sizes have also been validated and approved for future factory fitment on additional Cat Medium Wheel Loaders. 

Electro Static Technology appoints Mathew Laufik as global sales manager

Electro Static Technology, the manufacturer of AEGIS Shaft Grounding Rings, and specialist in low- to medium-voltage motor protection technology, has appointed Matthew Laufik as Global Sales Manager.  In this new role, Mr. Laufik will be responsible for the sales of AEGIS products to motor repair shops, motor manufacturers and end users in a range of processing industries worldwide through the company's international sales organizations and distribution network.  He will also manage all sales, marketing, and customer service personnel.

Calculating true capacity before buying your next trailer

Long before a single load is booked or any wheels turn, someone - usually a fleet manager - needs to determine exactly what is going to separate the road and the load. There's a lot riding on this decision because, as much as some would like to think otherwise, a trailer is never just a trailer. It can be manufactured to many different specifications, with multiple raw material options, dozens of load and geographical considerations, various top speed requirements and hundreds of possible axle configurations coming into play. And it all comes down to one objective - the ideal trailer for an operation's specific loads.

Bridgestone expands OTR line to include new tire for underground mining, landfill and salvage

Bridgestone Americas, Inc. has announced the expansion of its off-the-road (OTR) product portfolio to include a new size of the Bridgestone VSMS2 tire. The tire is now available in size 29.5R25 in the U.S. and Canada. Designed for underground mining, landfill and salvage environments, the Bridgestone VSMS2 tire delivers a 30 percent decrease in the frequency of sidewall cuts, improving the tire's overall life cycle performance by five percent.

Alliance Tire launches new line of rugged Galaxy OTR tires

Alliance Tire Americas, Inc. (ATA) launched a rugged, new line of Galaxy brand radial off-the-road (OTR) tires at Waste Expo in Las Vegas. Built for the special demands placed on loaders, dozers, backhoes, foklifts, articulated dump trucks and graders, the Galaxy radial OTR line features all-steel radial construction for puncture resistance and reduced heat buildup, as well as special compound for longer service life, according to Brian Sheehey, Vice President of Marketing for ATA. The result is a line of tires that deliver outstanding performance and a lower total cost of ownership.

Selecting the Right Solid Tires for Industry Specific Applications

Approximately twenty years ago, those of us working in the off-road heavy equipment industry regularly witnessed a high amount of failures in machines operating on cement or other hard surfaces. Extended steel rims were used with small, hard, rubber wheels. When these rubber tires chipped and chunked, vibrations and bouncing sent shockwaves into the machine, causing shortened life and expensive repairs, not to mention stress on operators. Drivetrain components (U-joints and articulation joints) in particular often suffered from stress cracks caused by vibrations and a bouncing machine. 

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

​When To Replace Forklift Forks

The forklift fork is often overlooked and under-inspected. Many are unaware of how often one should inspect their forks, and how to inspect them. Federal law (OSHA Standards 29 CFR 1910.178) mandates that forklift forks which see around-the-clock use should be inspected on a per-operation basis. As part of a pre-operation inspection, forklift forks should ideally be inspected for signs of cracks, bends, excessive wear or damage to either the fork tine or the positioning lock when using an ITA mounted fork.

BKT TIRES designed for recycling operations

As one of the leading Off-Highway tire manufacturers worldwide, BKT has been able to find solutions even for the most demanding and toughest operating conditions in recycling applications by means of specially designed products for loaders and material-handling machinery. This sector and any related application areas appear to be fairly interesting in terms of tires that are subject to severe strain. Not only do they have to meet the requirements as far as resistance and durability are concerned, but they must also offer stability to the equipment and thus a certain level of comfort to the operator. 

Tier 4 mandates driving demand for used non-Tier 4 equipment market

According to a recent survey of Independent Equipment Dealers Association (IEDA) members, the EPA’s Tier 4 mandates are driving up the demand of non-Tier 4, used construction equipment and predicts this trend will continue for the next several years. For many equipment categories, used equipment availability is outpacing demand, but for other categories, including excavators, backhoe loaders, wheel loaders, dump trucks dozers and compact equipment, IEDA members are seeing resale pricing increase by as much as 20 percent. Also, more than 50 percent of survey respondents noted that quality used equipment is getting harder to find.

Eaton GH100 and GH101 hoses for high-percentage biodiesel blend and high-temperature oil applications

Power management company Eaton has announced the launch of the GH100 and GH101 hoses for high-percentage biodiesel blend and high-temperature oil applications. Unlike standard fuel hoses that only last 1-2 years, Eaton’s GH100 and GH101 solutions are engineered for maximum performance in systems with a variety of fuel types, featuring a unique polymer that more effectively resists degradation.

Petro-Canada Lubricants makes leading hydraulic fluid even better with the launch of next generation HYDREX

Petro-Canada Lubricants, has reformulated its HYDREX line of hydraulic fluids to deliver leading wear protection, greater energy efficiencies, extended oil life and strong performance in wide temperature ranges. Customers have come to know HYDREX, an industry leader for more than a decade, as a high-performance fluid that exceeds the demands of today’s advanced hydraulic systems – even in harsh environments.

Subscribe to our free newsletter

Get our newsletter

Learn more