Terex Finlay showcased the latest addition to their 8-Series line up of heavy duty screeners, the ‘883+ triple shaft' at Bauma 2019. This new model has been developed specifically to work in a variety of dry and difficult sticky applications including quarry, mining, sand and gravel, construction and demolition debris and recycling applications.
CDE debuts all-in-one wet processing system at bauma
Ballyreagh Industrial Estate
Cookstown, Co Tyrone,
IE, BT80 9DG
+44 28 8676 7900
CDE has launched the Combo™ in a move set to revolutionize the wet processing industry.
CDE which has a long history of ground-breaking innovation and holds more patents than anyone else in the sector brought the pioneering M2500 to the market almost a decade ago.
The Combo™ encompasses five processes - feeding, sizing, sand washing, stockpiling and complete integrated water management which is a first for the industry and an important innovation to address a challenge faced by all customers of wet processing systems.
Sean Kerr, Chief Operating Officer, CDE said: "The Combo™ is no ordinary machine but rather a technological response to the challenges faced by materials producers. It has been designed with a focus on transferring greater reliability and efficiency benefits to customers. Offering a turnkey solution that delivers unrivalled control of in-spec washed products from a wide range of feed materials the Combo™ can be used in the construction, C&D waste recycling, industrial sands, mining and environmental sectors."
In brief, the Combo™ creates enhanced reliability and efficiency offering rapid onsite set-up, reduced start-up costs, the ability to process a wide range of feed materials (both natural sand and crushed rock), lower power consumption, a smaller footprint and unrivalled accessibility for maintenance.
Pre-tested and pre-wired before dispatch, the Combo™ arrives on-site in a single unit ready to plug and play either as a standalone plant or as part of a larger turnkey solution. The plant is built for rapid assembly and set up and can start processing material within days of arrival onsite.
Also, as it sits on its own chassis, the Combo™ requires minimal civils and pipework so operators can now easily relocate their plant across sites or to remote locations. Its smaller footprint also makes it ideal for tight quarries in urban settings.
With all essential processes being housed onto one chassis, the Combo™ system operates as one interconnected and pre-assembled unit which incorporates an integrated control panel with one single point of operation.
Significantly, the Combo™ wet processing system can produce up to two in-spec products from natural sand or crushed rock turning what is often considered a waste by-product into a product that adds value to the business.
In addition, the new technology allows customers almost total independence of water supply with up to 90% of process water recycled for immediate re-use in the system - ideal for jurisdictions with limited resources or those with existing environmental or impending environmental legislation.
A customer-focused solution, the Combo™ has been designed for single-operator use and unrivalled ease-of-access for routine maintenance with its patented swivel access to the pump leading to maximum production and prolonged life.
Lower power consumption compared to existing technology available on the market means customers can process a higher volume of materials with reduced operating costs generating exceptional return on investment.
Kevin Vallelly, Director of Engineering at CDE, said: "At CDE we are unlocking a New World of Resource and driving alternatives for sand production. Global demand for construction sand is more than 15 billion tonnes per year. Sand accounts for 35% of concrete which is used in the building construction industry. Large parts of the world face increasing demand for infrastructure and civil projects in the face of diminishing natural resources.
"Our sustainable technology producing washed and graded manufactured sand is helping supplement natural sand which is a finite resource and increasing in cost. By utilising normally low-value crusher fines for sand production we can extend the life of natural resources and add huge commercial value to our customers' enterprises. The Combo™ requires a small supply of fresh water compared with traditional systems which typically consume 10-15 times more water allowing its deployment in quarries and urban areas not previously known for sand production. In addition, sand can be produced closer to where concrete is required resulting in significant cost savings in the transport of aggregates. The Combo™ is industry leading technology designed to unlock a New World of Resource essential to protect our environment and build the world of the future."
For more information and to find out how our solutions can be tailored to meet your requirements visit cdeglobal.com/bauma2019
More from C&D Recycling
Powerscreen showcased its revolutionary OMNI by Terex technology to help improve jobsite safety and efficiency in operating Powerscreen equipment at the recent bauma 2019.
Municipalities are responsible for the care and maintenance of vast amounts of roads, from lanes to highways. When those roads are repaired or replaced, there's the potential to generate a significant amount of aggregate material - concrete and asphalt removed from the surface that must be dealt with.
Today's roadbuilding contractors are taking this material and recycling it more than ever before. However, research is showing that some municipalities are far better than others when it comes to using this type of aggregate in their roads - and some are far behind.
The leaders of the C&D recycling industry gathered in Brooklyn, NY - March 10-12 to hear an economic forecast for their industry, how to get and retain workers, and several materials specific sessions as part of C&D World 2019.
Keestrack offers today the most versatile range of hybrid and plug-in solutions in mobile processing technology for quarrying and recycling applications. This applies to the complete product range, from screening plants and stockpile conveyors to mobile track-mounted crushing solutions of all relevant technologies and for all production capacities.
Terex Washing Systems (TWS) will present live washing demos of their game-changing AggWash 60 during bauma 2019. This showcase, in conjunction with their German distributors Kolsch and Christophel, is being hosted at Mittermeier (Kolsch customer site), located next to Hall FN 1024 / 1, April 8-14, 2019.
The new EC750E HR high-reach excavator from Volvo Construction Equipment offers exceptional reach, with a maximum pin height of 118 feet, and can also be easily reconfigured using extensions and different boom sets to become a multi-use demolition tool.
Brokk has introduced the Brokk 520D. Meeting both Tier 4 Final and Europe's Stage IV emission standards, Brokk says that the new machine is the most eco-friendly diesel demolition robot on the market. The 520D replaces the Brokk 400D, one of the first diesel models released, and comes equipped with Brokk's signature SmartConcept technology, boasting 40 percent more hitting power.
LBX Company has introduced two new models for the U.S. and Canada: the Link-Belt 250 X4 Material Handler (MH) and the 250 X4 Scrap Loader/handler (SL). Both feature an electronically-controlled 177 horsepower Isuzu engine that meets EPA Final Tier 4 requirements, without the need for a diesel particulate filter (DPF).
McCloskey to debut latest crushers, screens, stackers and washing plants on the world stage at bauma 2019
Screening and crushing industry manufacturer McCloskey International will demonstrate its continued growth with an exciting roster of new products and a significant presence at bauma 2019 in Munich, Germany, from April 8-14.
Powerscreen is one of the world's leading providers of mobile crushing, screening and conveying equipment. Official distributors, Powerscreen of Canada will exhibit at the National Heavy Equipment Show in Toronto, from March 28-29th, 2019. Exhibiting at booth number 5004, experts will be on hand to talk crushing and screening and visitors will have the opportunity to get up close to a Powerscreen Chieftain 2200 screen.
Michael Gross, Zanker Recycling, San Jose CA, and Clarence "Jay" Giltz, Eagle Crusher, will be inducted into the C&D Hall of Fame, the industry's highest honor, at the Construction & Demolition Recycling Association's C&D World 2019, upcoming this March 10-12 in New York City.
2018 marked the most successful year to date for RUBBLE MASTER. With record sales and an export quota of 97% RUBBLE MASTER continues to hold their status as a market leader in Compact Crushing and Screening. The company says its continued success comes from higher product demand, healthy expansion in global markets, and new screening products.
ALLU Group will be exhibiting and demonstrating equipment from its Transformer, Processor and other equipment ranges at bauma 2019. As well as established and proven equipment, ALLU will be unveiling its latest developments, and launching new and exciting solutions.
Construction and demolition (C&D) materials are hefty. It is why we can so effectively build roads, bridges and buildings out of them. It's also why, by weight, they are the most significant material in the North American waste stream. This creates a challenge for recycling, as it's usually too expensive, in terms of ROI, to ship most recovered C&D end products, including wood, concrete, drywall, asphalt, and asphalt shingles.
Rubicon Global, the Atlanta-based technology company that provides waste, recycling and smart city solutions to businesses and governments worldwide, has successfully diverted nearly 12 tons of waste destined for landfills from State Farm Arena during last week's festivities in Atlanta, Georgia. This waste was generated as a result of five events being held at the State Farm Arena leading up to and in support of the ‘Big Game.'
Municipalities are responsible for the care and maintenance of vast amounts of roadway, from alleys to highways. When those roads are repaired or replaced, there's the potential to generate a significant amount of aggregate material - concrete and asphalt removed from the old surface that must be dealt with.
Ecowaste Industries operates the Ecowaste Landfill in Richmond, B.C. where they accept inert refuse, mainly from construction and demolition activities. This material is renewed into products such as compost, bark mulch and crushed concrete for sale. At the end of 2018, Ecowaste Industries Ltd. acquired the operating assets and facilities of Urban Wood Recycling and Smithers Enterprises, both based in Vancouver. The transaction was approved by both parties on November 21, 2018 and the sale closed on December 31, 2018. Since the start of the year, Ecowaste has been accepting Urban and Smithers customers at the Ecowaste Landfill in Richmond.
Brokk has introduced the Brokk 200, a new weight class of machine. The new model packs the power of a 3-ton Brokk machine into a 2-ton package. The Brokk 200 is one of four new next generation remote-controlled demolition machines Brokk showcased at World of Concrete 2019 in Las Vegas.
At concrete and aggregate recycling sites, recycled aggregate is produced by crushing concrete and asphalt to reuse the aggregate in the construction industry as a base for roads or building foundations. To keep operations running site managers rely on loaders to push large jagged chunks of torn up sidewalk, roadway or building materials - which can contain steel rebar - to the crushing line to reduce its size.
On March 13th, 2019, Frontline Machinery is hosting their annual Crushing & Screening Equipment Demo Day. The largest of its kind in Canada, this special event brings together customers and stakeholders from the aggregate, C&D and civil construction industry for a live, hands-on demonstration of crushing, screening and stacking conveyor systems.
Terex Washing Systems (TWS) has announced further investment in their North American sales and operational teams that will enable customers to engage directly with TWS experts to discuss their requirements and collaborate in the development of innovative customer-specific solutions.
Cat multi-processors feature quick-change jaws, greater cutting/crushing forces, increased speed, durable design
Three new Cat MP332, MP345 and MP365 models are heavy-duty, high-production tools that accept multiple interchangeable jaws for taking on a variety of specialized demolition tasks. The new models, compared with previous models, can cycle 50 percent faster and generate up to 19 percent greater cutting/crushing forces. An innovative locking system enables a single operator to typically change jaw types in 15 minutes or less, using only standard hand tools. An included stand securely and stably holds unused jaw sets.
- Concrete Cutter: outer jaw cracks concrete, inner jaw shears steel
- Demolition: cracks thick concrete structures
- Pulverizer: crushes concrete, separates rebar
- Shear: cuts structural steel, pipe, cable
- Tank Shear: cleanly cuts tanks or plate steel at right angle on three sides
- Universal: cuts steel and crushes concrete
Metso is introducing new higher capacity models to its popular wheel-mounted Metso NW Rapid series. In addition to a bigger jaw crusher model, the NW Rapid units are now also available with a variety of robust cone crushers, including the first model with the MX crusher. Easily transportable using standard prime movers, over a thousand NW Rapid models have already been sold into aggregates and C&D recycling applications.
In 2017, McLanahan Corporation began a partnership with Anaconda Equipment of Northern Ireland to distribute and sell Anaconda's line of mobile track equipment. As the relationship between the two companies progressed, it became clear that their values and business styles were closely aligned. Today, the two companies are proud to announce that Anaconda Equipment will officially join McLanahan Corporation's family of companies upon legal closing within the next 30 to 60 days.
BossTek has updated its family of self-powered dust suppression equipment with Tier IV Final-compliant generators, ensuring compliance in all 50 states and Canada. BossTek made the announcement with the debut of the new DustBoss DB-60 Fusion, a field-proven suppression system driven by a high-reliability 25 HP electric motor and paired with a gen set powered by a heavy-duty 4-cycle indirect injection diesel engine. Designed, engineered and assembled in the USA, the generator features a dual-containment fuel cell, heavy gauge lockable enclosure and oversized brushless alternator for easy starting.
Okada America, Inc. and Rotar International BV have entered into a joint alliance of their demolition attachment businesses in the North American marketplace, effective January 1, 2019.
Multiple major manufacturers of horizontal grinders have released new models in 2018. HOGS, as they are sometimes called (HOrizontal GrinderS), are unquestionably the workhorse of the wood recycling industry and are a key piece of equipment for composters, land clearing contractors and biomass-for-energy producers, as well as C&D and MSW processors, where in both cases, wood and other organics are part of a mixed stream of materials. The latest model horizontal grinders feature lighter weights with higher production, increased transportability and site mobility, diesel, hybrid and fully electric power options, along with sophisticated controls systems, and ease of use and maintenance for operators and owners. This article looks at the latest horizontal grinder models and updates from Morbark, CW Mill, Rotochopper, CBI, Diamond Z, Bandit, Vermeer, Precision Husky, and Peterson Pacific.
McCloskey held its first multi-spread demonstration event, at King Bros. Quarry in Co. Armagh, Northern Ireland, on Thursday, November 1, highlighting the power of their equipment working together. The demonstrations were an integral part of events tailored to familiarize both new and established dealers with the versatility and productivity of McCloskey's latest products
Brokk, the manufacturer of remote-controlled demolition machines, has introduced the Brokk 170. With SmartPower – the company's signature intelligent power management system – the new machine offers 15 percent more power than its predecessor, the Brokk 160, but retains the same compact dimensions. The Brokk 170 is one of four new next generation Brokk remote-controlled demolition machines Brokk is launching at World of Concrete 2019 at booth C4249 in Las Vegas.
EvoQuip made an impact on the US market with a successful Open Event on November 8th 2018. Over 100 dealers and new and existing customers made the trip to Cave City, Kentucky to see live working demonstrations of the compact crushing and screening range.
Haver & Boecker has launched the Tyler F-Class portable plant that includes several new technologies to improve setup time and extend equipment longevity in quarry and mining operations. The portable plant features a new custom-built chassis equipped with six hydraulic run-on jacks that quickly level the plant, eliminating the need for cribbing. The run-on jacks also ensure the chassis stays level during operation, which minimizes equipment wear.
Terex MPS welcomed over 80 distributors to their highly successful Americas Distributor Conference and Equipment Expo in Oklahoma City from October 15 to 18 2018.
Superior Industries Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, says it's ready to debut two new tracked conveyor models. Joining the manufacturer's top-selling line of portable conveying solutions are a 75-foot (23m) tracked stacker and an 8-by-16-foot (2.4 x 4.9m) tracked feed hopper.
Delegates from all over the world joined together at the inaugural Circular Driven Economy Symposium in London on the 18th - 19th September, to learn more about the opportunities in recovered construction and demolition waste material (C&D waste). Speakers from research bodies like SINTEF, academic institutions like Queen's University Belfast, construction and manufacturing firms like LafargeHolcim and Mapei, and the European Commission all provided plenty for delegates to think about.
Industry professionals from around the world gathered in Newton, New Hampshire, week of October 1st, for the 2018 CBI and Ecotec Factory Forum. CBI's expanded on-site demo arena included live demos of twelve machines from the CBI and Ecotec product lines, including the all-new 6800CT Horizontal Grinder and Phoenix 1600 Trommel Screen.