This ad will close in 15 sec
Tags
C&D Recycling

Metso to expand NW Rapid crushing plant range

The NW Rapid series models are electric driven and they have Metso's IC(TM) Series crushing automation as a standard feature.
The NW Rapid series models are electric driven and they have Metso's IC(TM) Series crushing automation as a standard feature.

Metso is introducing new higher capacity models to its popular wheel-mounted Metso NW Rapid series. In addition to a bigger jaw crusher model, the NW Rapid units are now also available with a variety of robust cone crushers, including the first model with the MX crusher. Easily transportable using standard prime movers, over a thousand NW Rapid models have already been sold into aggregates and C&D recycling applications.

According to Metso, planning a crushing and screening process can typically take months. Additionally, it's often difficult for aggregates producers and recyclers to move their largest equipment from site to site. NW Rapid is the market's first wheel-mounted crushing unit that can be delivered in standard containers from the factory as well as easily moved from one site to another using standard prime movers. The flexibility of the concept allows producers to profitably offer their customers contracts of various sizes.

Besides portability, other advantages of the NW Rapid models include quick set-up and best-in-class production capacity. NW Rapid has been designed so that it can be set-up and dismantled in 24 hours. The 11 predesigned layouts make planning the crushing process significantly faster. The solution consists of modules that can be used to create a variety of combinations as needed.

"A large share of our customers supply aggregates for public infrastructure projects that can last from a few months to a couple of years. Depending on the project phase, our customers must have the ability to offer also very high capacity. The new NW Rapid models enable production capacity to temporarily be increased up to 500 tons per hour, which is equal to the capacity of a fixed plant. Because of the flexibility, customers can better respond to short-notice orders and can accept contracts that couldn't be carried out with the traditional fixed solutions," said Julius Mäkelä, Metso's Director of Portable and Modular Solutions.

The NW Rapid series models are electric-driven and they have Metso's IC Series crushing automation as a standard feature. Additionally, the NW Rapid units can be connected to the Metso Metrics remote monitoring service, which allows central monitoring of the entire crushing fleet's production and energy consumption.

New Rapid models spark interest around the world

The NW Rapid series is ideal for producing high-quality end products with multistage crushing and screening units. Now, the NW120 Rapid jaw model will be joined by the screen-equipped NW330GPS and NW300HPS cone crushers. The NW4MXS is the latest introduction to the series and brings the MX4 Multi-Action cone crusher, launched in 2017, to the integrated crushing solution for the first time. Serial production of the NW4MXS will start in the second half of 2019. For other models, factories are already working to bring new machines to customers globally.

According to Metso, the NW Rapid series has sparked great interest, and more than one thousand units have been sold since 2015.

"The demand for Metso's crushing and screening plants has been growing in recent years, and, in fact, NW Rapid has quickly become one of our most popular solutions especially in fast-growing markets like India, where urbanization and huge public infrastructure projects have accelerated growth of the aggregates sector. Because of the flexibility and cost-efficiency, NW Rapid is of interest also in several other markets: the equipment has already been sold to more than 20 countries," says Renaud Lapointe, Senior Vice President, Business and Product Management for Aggregates Equipment at Metso.

  • Metso NW120 Rapid jaw crushing unit
    Metso NW120 Rapid jaw crushing unit
  • Metso NW300HPS Rapid crushing & screening unit
    Metso NW300HPS Rapid crushing & screening unit

Company Info

Related Products

Latest News

Tags
Plastics Recycling

Lindner helping Netherlands plastics recycler transform dirty film into high-quality regranulate

The agricultural film is collected from over 2,500 farmers in the Benelux countries and northern Germany.

Daly Plastics is one of the largest plastics waste processing companies in the Netherlands. At their Zutphen site, Daly Plastics' subsidiary Caroda Polymer Recovery recycles agricultural and packaging films, with the aim to produce regranulates of the same quality as virgin material. Two Jupiter 2200 and four Micromat 2000 shredders from Austria-based Lindner Recyclingtech provide the recovery facility with the ideal particle size.

Read More

Tags
Industry News
Waste to Energy

GTI quantifies opportunity to produce low-carbon Renewable Natural Gas (RNG) from wood wastes

The engineering design study, funded by West Coast utilities and a state government agency, was conducted to better understand the value, benefits, and cost of utilizing wood wastes to reduce greenhouse gas (GHG) emissions.

Today, GTI has released a site-specific engineering design titled Low-Carbon Renewable Natural Gas (RNG) from Wood Wastes. GTI led a team of engineers and scientists to produce a "blueprint" for converting an existing biomass facility into an RNG production site, using the wood waste feedstock and some of the existing infrastructure. A biomass power plant in Stockton, California, was the host site for the engineering design effort. In addition to providing data about the process technologies, the integrated plant, and production costs, the study highlights the many environmental benefits and the low-carbon fuel produced. 

Read More

Tags
C&D Recycling

After record year in 2018 Rubble Master looks to continued growth

RUBBLE MASTER's world-wide success has been the result of unwavering vision and leadership by Gerald Hanisch. Gerald is the founder and CEO of RUBBLE MASTER having started the company nearly thirty years ago.

2018 marked the most successful year to date for RUBBLE MASTER. With record sales and an export quota of 97% RUBBLE MASTER continues to hold their status as a market leader in Compact Crushing and Screening. The company says its  continued success comes from higher product demand, healthy expansion in global markets, and new screening products.

Read More

Tags
Paper Recycling
Plastics Recycling

​Canada Fibers awarded contracts to design, build and operate two technologically advanced recycling facilities

​Canada Fibers awarded contracts to design, build and operate two technologically advanced recycling facilities

Canada Fibers Limited (CFL) has been awarded two contracts to design, build and operate advanced single-stream post-consumer Material Recovery Facilities (MRFs) in Winnipeg, Manitoba and Peel, Ontario.  The Company is constructing an 80 thousand square foot greenfield facility in Winnipeg and is retrofitting the Region of Peel's existing MRF.  Both projects involve advancements to recovery technologies in response to increasingly rigorous quality standards from industries utilizing post-consumer recyclable materials. 

Read More

Tags
C&D Recycling
Legislation & Regulations

LEED changes a boost for C&D

LEED changes a boost for C&D

Construction and demolition (C&D) materials are hefty. It is why we can so effectively build roads, bridges and buildings out of them. It's also why, by weight, they are the most significant material in the North American waste stream. This creates a challenge for recycling, as it's usually too expensive, in terms of ROI, to ship most recovered C&D end products, including wood, concrete, drywall, asphalt, and asphalt shingles.

Read More

Tags
Industry News

The Global Recycling Foundation looks at the best recycled fashion ahead of London Fashion Week

The Global Recycling Foundation urges London Fashion Week, and the fashion industry as a whole, to promote the importance of recycling in the industry by recognising the brands doing it best. It is also encouraging Fashionistas, as well as people around the world, to support Global Recycling Day on 18th March 2019 in helping to sustain a green circular economy for the future of our planet.

With London Fashion Week around the corner (15th - 19th February), the Global Recycling Foundation is calling on the fashion industry to champion recycling by shining a spotlight on the brands already leading the way on recycled fashion. It's also calling on the industry to support Global Recycling Day, taking place on 18th March 2019. 

Read More

Tags
C&D Recycling
Solid Waste

​Rubicon Global and State Farm Arena divert nearly 12 tons of waste from landfills

​Rubicon Global and State Farm Arena divert nearly 12 tons of waste from landfills

Rubicon Global, the Atlanta-based technology company that provides waste, recycling and smart city solutions to businesses and governments worldwide, has successfully diverted nearly 12 tons of waste destined for landfills from State Farm Arena during last week's festivities in Atlanta, Georgia. This waste was generated as a result of five events being held at the State Farm Arena leading up to and in support of the ‘Big Game.'  

Read More

Tags
C&D Recycling

Using recycled aggregates for roadbuilding is the way of the future – time for many to catch up

Recycling concrete and asphalt from roadways keeps the material out of landfills and is a green alternative to using virgin aggregates for new roads.

Municipalities are responsible for the care and maintenance of vast amounts of roadway, from alleys to highways. When those roads are repaired or replaced, there's the potential to generate a significant amount of aggregate material - concrete and asphalt removed from the old surface that must be dealt with.

Read More

Tags
Shows & Events

New ST80T stacker from McCloskey takes the stage at AGG1/World of Asphalt

The ST80T Radial’s unique tool free transport design allows the equipment to move freely from site to site without needing to remove the wheels, delivering true portability for multi-site projects and operations.

AGG1/World of Asphalt visitors received a first look at McCloskey International's new tracked radial stacker - the ST80T Radial - that allows operators to switch from tracked to wheel in minutes. 

Read More

Tags
Paper Recycling
Plastics Recycling

Machinex and Canada Fibers partnership to result in two of the most technologically advanced single-stream facilities in North America

Stephen Miranda of Canada Fibers and Jonathan Ménard of Machinex at the Peel Integrated Waste Management Facility where the two companies are collaborating on a major retrofit in 2019.

Toronto-based Canada Fibers Ltd. (CFL) is building two single-stream recycling facilities in 2019 that will include the most advanced, high-tech fibre and plastics sorting and recovery systems in Canada. In Winnipeg, Manitoba, a completely new 30-tonnes-per-hour facility (approximately 80,000 square feet) is currently under construction and scheduled to open in the fall. In the Region of Peel, Ontario, the existing Peel Integrated Waste Management Facility MRF, owned by the Region, will be retrofitted for 31.5-tonnes-per-hour capacity, with the updated facility (approximately 85,000 square feet) scheduled to open in the first quarter of 2020. 

Read More

Tags
Paper Recycling

Both good and bad news for OCC and recovered paper exporters to start 2019

Both good and bad news for OCC and recovered  paper exporters to start 2019

The good news for recovered paper exporters as the calendar flipped to another new year was China's issuance of almost six million short tons worth of import licenses in December. The first batch of permits issued by China's Ministry of the Environment, covering about 5.5 million tons, was more than double the amount of recovered paper allowed by China's first batch a year earlier.

Read More

Tags
C&D Recycling
Wood Recycling

Ecowaste Industries to add to C&D materials transfer and MRF capacity

Ecowaste Industries to add to C&D materials transfer and MRF capacity

Ecowaste Industries operates the Ecowaste Landfill in Richmond, B.C. where they accept inert refuse, mainly from construction and demolition activities. This material is renewed into products such as compost, bark mulch and crushed concrete for sale. At the end of 2018, Ecowaste Industries Ltd. acquired the operating assets and facilities of Urban Wood Recycling and Smithers Enterprises, both based in Vancouver.  The transaction was approved by both parties on November 21, 2018 and the sale closed on December 31, 2018. Since the start of the year, Ecowaste has been accepting Urban and Smithers customers at the Ecowaste Landfill in Richmond. 

Read More

Tags
Fleets & Technology
Solid Waste

Compology’s in-dumpster cameras and Contamination Score provide path to sustainable, efficient waste collection

Jason Gates, Compology founder and CEO.

Compology, based in San Francisco, got its start in the fall of 2013, with its first camera-based container monitoring system deployed in 2014 at the University of California in Santa Cruz. The system is designed to monitor container fullness and automate the process of container pickups between waste generators and haulers. Today, about a fifth of Compology's business is in Canada, with the remainder in the U.S.

Read More