Tags
Metals Recycling
Solid Waste

STEINERT ANNOUNCES NEW MOBILE SERIES RENTAL PROGRAM

Steinert's NES Eddy Current Separator is offered in multiple configurations for material sizes from 3/8" to 8".
Steinert's NES Eddy Current Separator is offered in multiple configurations for material sizes from 3/8" to 8".

Steinert US, a leading supplier of separation equipment for the material recovery and recycling market, announced on December 12, a new mobile series rental program.  

Steinert offers mobile NES (Eddy Current Separator) and ISS (Induction Sorting System) rental systems. Units are competitively priced on a monthly or quarterly rental or rent-to-own basis and the rental fee includes a trained service technician on site for initial setup and operator training. 

Steinert will design a rental program to suit the customer's needs. Units can be secured for as little as three months on either a rental or rent-to-own basis with an attractive buyout option.
Steinert mobile systems immediately begin producing product that pays the rent and leaves the customer with a nice profit, every month.

Designed specifically for customers who want to take their non-ferrous metal recovery on the road, the Steinert mobile series allows for recovery anywhere a power source and fairly level ground can be found.

Steinert mobile units are perfect for landfill mining, stockpile reduction/management, and many other specialized projects.

Steinert's ISS Induction Separation System is an all metal sensor sorter offered in several configurations to suit multiple applications.

Key features of the ISS include: all weather operation; a built in compressed air dryer and filtering system; an optional on board compressed air supply; full capability interface control; wireless remote, maintenance ready; and no concrete pad is required.

Steinert's available NES Eddy Current Separator is an affordable non-ferrous recovery solution offered in multiple configurations for material sizes from 3/8" to 8".

Key features of the NES include: an on board utility compressor; user-friendly operation; no special transport permit required; fast on-site set up (generally less than 10 minutes); and no concrete pad required.

Interested customers can contact SteinertUS at (800) 595-4014 or sales@steinertus.com for more information, or to reserve a rental unit.

STEINERT PRESENTS LARGE DONATION TO
CINCINNATI CHILDREN’S HOSPITAL MEDICAL CENTER

On December 3, 2013 Steinert US presented a check for $26,936.00 to Cincinnati Children’s Hospital today on behalf of it’s customers, vendors, and industry partners who participated in the October charity casino event.

Steinert held a charity casino night on October 23, 2013 during its annual Steinert University certification event.

Sponsorship support from Metso, US Shredder, Machinex, General Kinematics, Sunbelt, Joest, AEI, Vecoplan, and Sullivan Palatek helped to make this generous donation possible.

“Steinert is proud to support Cincinnati Children’s Hospital and the wonderful work they do for children in our community and around the world. Without the generous support of our customers and partners this donation would not be possible. We are blessed to work in such a special industry filled with so many generous, caring individuals,” said Steinert President Jason Looman.

The 2014 Steinert University Certification event is scheduled for September 10-11, 2014 and will again feature a charity event benefitting Cincinnati Children’s Hospital. To learn more about Steinert University or to get more information on 2014 charity sponsorship opportunities please contact Nicolle Williams at +1 (800) 595-4014.

Founded in 1889, Steinert has long been recognized as a leader in magnetic separation technology. Over the last decade, Steinert has also become a leader in sensor sorting applications. Steinert provides electromagnetic drums, eddy current separators, and sorting systems based on induction, X-Ray, and near infrared. Steinert is headquartered Cologne, Germany with offices in the United States, Brazil, Australia, and Japan.

Established in the United States in 2003, Steinert US is the North American headquarters of Steinert Elektromagnetbau GmbH. The company manufactures a complete line of magnetic and sensor-sorting equipment designed to separate and recover a wide range of materials. 

Company Info

  • Steinert US

    285 Shorland Drive
    Walton , KY
    US , 41094

    STEINERT is the global leader in separation technology solutions for the mining, scrap, waste and recycling industries. Manufacturing a complete line of magnetic and sensor-sorting equipment, it provides full solutions designed to separate and recover a wide range of materials. Engineering electromagnetic drums, eddy current separators, and sorting systems based on induction, X-Ray, and NIR, STEINERT is the only full range industry supplier with more than 125 years of expertise and global customer service.

    Read more

Related News

Latest generation FB6000 weighing instrument with intuitive web interface

Fairbanks Scales, Inc. has announced the release of the latest generation of the FB6000 weighing instrument, featuring a new, dynamic web interface that enables rapid calibration and custom ticket formatting. The latest generation of the FB6000 weighing instrument is the most functional and affordable instrument in its class, and is compatible with both analog and digital weighing technology. The FB6000 is ideal for all mid-range single truck scale applications including In/Out, Gross/Tare/Net, or Basic (one button) In/Out weighing.

Read More

Profitable and practical plastics reuse and recycling for the circular economy

The Recycler Value Chain for scrap plastics, from supply to market.

Profitable and responsible reuse and recycling of plastics from products, packaging and scrap is an enormous business opportunity – especially given today’s economic and environmental waste of most plastics. Realizing this opportunity requires a keen understanding of markets, material, equipment, input-output data and environmental metrics, as well as effective collaboration among multiple stakeholders in the plastics value chain.

Read More

Sponsored Content

Leading Edge Security Technology

Caliber Communications Inc. is a technology-based Canadian company that has created a flexible, cost effective and reliable replacement to physical guarding services. The company has engineered and developed a unique communications platform that operates on the cellular infrastructure anywhere in North America. To date, this platform has been specifically utilized for applications requiring remote security monitoring in a variety of  industries, locations and settings. The platform is completely modular and can be completely independent of existing infrastructure where no resources are available.  This allows the units to be set up anywhere they are required to provide effective security coverage. If power is not readily available, the units are designed to operate on very low wattage making solar power a viable solution.  All units provide 360 degrees of situational awareness with stationary cameras. Additionally, all units come equipped with a PTZ camera (pan, tilt, zoom) to drill into the images and gather specific data for evidence.

Read More

Forkliftable recycling collection cart now features durable, powder-coated base as standard

The 50P-16S recycling cart is rotomolded using 100 percent puncture-resistant, chemical-resistant, and waterproof polyethylene.

The 50P-16S forkliftable recycling collection cart from recycling product manufacturer MODRoto, now features the company's sturdy, powder-coated, metal support base as standard. Delivering the load bearing strength and rigidity of steel and the weather-resistance of plastic, the powder-coated, metal support base safely handles up to 500 lbs. of paper, glass, metal, plastic, construction and demolition debris, and other recyclable materials. The sturdy support base joins a rugged, rotationally molded, plastic bin above with three, steel fork tubes below that allow the entire recycling cart to be raised, moved, rotated 180 degrees and dumped by forklift to minimize manual lifting, bending and reaching. The innovative cart is set on six, industrial-strength, non-marking casters arranged in a clever configuration for easy rolling on and off scales and tailgates when rolled manually.

Read More

Saskatchewan scrap recycler opens the door to new opportunities by making the switch to a dedicated material handler

The Mryglod family at their yard in Weyburn, Saskatchewan, from left to right: Brad, Kyle, Sandra, Tyler and Travis.

Mryglod Steel & Metals Inc., a premier scrap metal processor based in Saskatchewan, is proud of its long history of paying attention to the environment. In fact, environmental stewardship is not just a slogan of the new millennium, as the company points out, “we’ve been doing this since World War II.”

Read More

Class instead of mass -- UniSort System helps recycler achieve the highest level of purity

Christian Hündgen Plant manager and third generation employee.

Christian Hündgen is convinced that the more secondary raw materials are fed back into the production of products, the better. That’s why the family-run enterprise focuses on achieving as high a level of material purity as possible when sorting waste. “We concentrate more on the sorting depths than on high throughput rates. It ensures our customers in our region will remain loyal to us,” says Hündgen.

Read More

Tags
Plastics Recycling

ISRI proposes auto bumper plastics specification addition

ISRI proposes auto bumper plastics  specification addition

The Institute of Scrap Recycling Industries (ISRI) Board of Directors recently approved the addition of an auto bumper plastics specification to the plastics specifications listed in the Scrap Specifications Circular. As per ISRI’s Policy Manual, any party may submit to ISRI a written appeal of the ISRI Board’s approval of this new specification up to 30 days after publication of this notice. Written appeals must provide a rationale and a request for action and should be sent to ISRI President Robin Wiener.

Read More

Terex implements expansion plan for Fuchs Material Handlers

The Fuchs MHL390 F and MHL370 F – give customers more material handling options to fill a wider variety of application needs.

Terex Corporation continues to implement a series of strategic moves and investments to better position its purpose-built Fuchs material handler business for global expansion and sales growth. Recently, the business was rebranded “Fuchs – A Terex Brand” in key markets for consistent global brand recognition. The Fuchs line also transitioned to the Terex Material Processing segment, which is a better strategic fit for the business within the broader Terex portfolio. Additionally, multiple new machine introductions were made at key international trade shows during the first two quarters of 2016, including the ISRI 2016 Convention in Las Vegas, Nev. and Bauma and IFAT 2016 held in Munich, Germany.

Read More

Next-Generation Watson XRF Metal Analyzer

Next-Generation Watson XRF Metal Analyzer

X-ray technology innovator Tribogenics today introduced a powerful next-generation Watson XRF metal analyzer following up on last year’s unveiling of the industry’s first sub-$10,000 hand-held XRF analyzer. Despite a range of highly robust enhancements, such as a field-exchangeable and auto-calibrated source cartridge, automated upload of data to the cloud, and a newly attained CE Mark that makes it available to a worldwide growth market, the next-generation Watson XRF device continues to be priced one-half that of competing handheld solutions.

Read More

Tags
Solid Waste

New online calculator helps municipalities quantify financial benefits of buying waste and recycling carts directly

New online calculator helps municipalities quantify financial benefits of buying waste and recycling carts directly

Toter, a Wastequip brand and manufacturer of products used in the collection of waste, recycling, and organics, has added a new online calculator to its website to allow municipalities to quantify the financial savings of buying trash carts directly from Toter rather than purchasing or renting them from a commercial hauler.

Read More

Tags
Industry News
Solid Waste

BHS Systems win gold and silver excellence awards from SWANA

SWANA Excellence Awards Program recognizes outstanding solid waste programs and facilities with environmentally and economically sound solid waste management practices.

The Solid Waste Association of North America (SWANA) has announced the 2016 winners of the association’s annual Excellence Awards. San Jose, California-based Zanker Recycling was awarded the Recycling System Gold Award, the top honor, for its Demolition Recycling Operation. Silver was awarded to California-based Athens Services’ Sun Valley Mixed Materials Recovery Facility (MRF). Both systems were designed, engineered, manufactured and installed by Bulk Handling Systems (BHS).

Read More

Tags
Metals Recycling

Tribogenics expands sales channels to meet demand for breakthrough, low-cost hand-held XRF technology

Watson XRFM1

Tribogenics, the inventor of triboluminescence-based X-ray technology for industrial, medical and scientific applications, has announced that it has added new sales and distribution coverage to meet the growing demand for the X-ray industry’s first ever hand-held XRF spectrometer device under $10,000. The new Watson hand-held XRF instrument performs positive material identification (PMI) of more than 430 metal alloys in a matter of seconds. New manufacturers representatives PE Systems, PSS and Hill Tech will now sell and support Watson XRF devices in the San Francisco Bay Area, Southern California, Arizona, Nevada, Oregon, Washington and Utah.

Read More

Tags
Plastics Recycling
Solid Waste

Tomra Sorting chosen by Monoworld Recycling Ltd as technology partner for groundbreaking new plastics recycling facility

Monoworld's new £9 million state-of-the-art PRF

Global sensor-based sorting specialist, TOMRA Sorting, has been chosen by Monoworld Recycling Ltd (MRL) as the technology partner for a new £9 million state-of-the-art plastics recycling facility (PRF) in Rushden, Northamptonshire, England. Monoworld Rushden is the UK’s first mixed plastics to extrusion HDPE and PP recycling plant. The company also operates a film and metal sorting plant at Sharnbook in Bedfordshire.

Read More

Tags
Metals Recycling
Solid Waste

New Fuchs MHL320 F material handler delivers uncompromised performance in entry-level machine

The new MHL320 F handler features a fuel-efficient 127.4-hp (95-kW) diesel engine that meets Tier IV Final emissions standards.

Built for efficiently tackling a range of indoor and outdoor applications from municipal solid waste processing to small scrap yards, the new Fuchs MHL320 F material handler boasts a compact yet powerful design. With an 11% more powerful engine and offering the same features found on larger Fuchs handlers, this versatile 50,485-lb (22.9-t) MHL320 F handler is the perfect entry level unit for operations who need the high lift capacities at extended reaches, efficient sorting capabilities and fast trailer loading/unloading only delivered by purpose-built handlers.

Read More