UNTHA XR aims to recycle one million mattresses at new Textek facility
Following 18 months of research, design and development, an automated mattress recycling line is now in full operation at Textek, with a target to recycle one million end-of-life mattresses at the facility in 2020, thanks to two UNTHA XR3000C shredders.
The Shropshire operation can mechanically dismantle a mattress in as little as 30 seconds, compared to the seven minutes it would take for a worker to manually break down this complex product type.
UNTHA's machines shred the mattresses with ease, down to a <50mm particle size to liberate the steel from the flock. Sophisticated downstream technology then separates clean flock from contaminated material - the latter of which is fed back for re-shredding to ensure a 100% recycling rate.
Allen Jackson, Director at Textek, elaborated: "An estimated 7 million mattresses were disposed of in 2017, at a cost of at least £20m, before considering transport and handling. This - coupled with illegal dumping, not to mention the environmental and commercial cost of manufacturing new replacement products - means the impact of this waste stream is quickly spiralling.
"While government initiatives are gradually looking at improved strategies for bulky waste handling, we identified a need to move faster, so turned our attention to designing our own automated line.
"Following substantial investment, the facility is installed, tried and tested and now stands to divert one million mattresses from landfill in the next 12 months alone.
"But we don't want to stop there - already we're thinking about the creation of additional dedicated bulky waste recycling lines, in other parts of the country."
It is estimated that the recycling of one million mattresses in 2020 will result in recovering approximately 20,000-25,000 tonnes of steel wire, which can be sold, recycled and remanufactured in line with the waste hierarchy. With its high calorific value (30mj), the clean flock also has the potential to be mixed to produce an SRF for the Waste to Energy industry.
Commenting on the project, UNTHA UK's sales director Gary Moore said: "The National Bed Federation published a report in June 2019 which admitted the ambitious nature of the target to divert 75% of mattresses away from landfill.
"The NBF itself set this target in October 2018 but considering the recycling rate at the time of writing the report was only 20%, the uphill struggle is clear.
"The industry needed a step change and what Textek has done, is truly inspiring. We always say our technology is designed to process even materials that are deemed unshreddable, and it's a pleasure to see an organisation push the boundaries of innovation and put our machines to the test."
On January 1st, 2021, the Basel Convention's plastics waste amendments became effective in Canada. The amendments focus on the international movement of plastic wastes that may have limited recycling options or be more difficult to recycle. This change will likely be felt all along the supply chain, including collectors, processors, and exporters. If you export plastic waste for recycling or final disposal, or if you are an exporter of other scrap materials, including plastic, paper, or e-waste, you may be subject to Canada's Regulations, and a valid export or transit permit may be required.