According to Germany-based Steinert, everyone involved in the plastics industry is concerned with strict legislation and a social sense of responsibility for recovering plastics. Black plastics represent a particular challenge because they cannot be detected with the optical sorting technology found in standard recycling plants. STEINERT technology allows black plastics to be sorted from the general waste stream into pure grades. This enables plastic-processing companies to respond to the new challenges of the circular economy in a cost-effective manner and to be equipped for all the processes involved in plastic recovery and processing in equal measure.
Liebherr featuring powerful wheel loader and high-precision wheeled excavator at Waste Expo 2019 in Las Vegas
Liebherr USA, Co. Construction Equipment is displaying the high performance L 556 XPower wheel loader and the A 914 Litronic wheeled excavator at Waste Expo in Las Vegas, Nevada from May 6 through May 9, 2019.
The innovative Liebherr-XPower driveline on the L 556 XPower wheel loader offers reduced operating costs, lower fuel consumption and increased working efficiency that allows the machine to maneuver in the toughest waste industry conditions. The Liebherr-XPower driveline achieves a 30 percent reduction in fuel consumption when compared to conventional travel drivelines. The XPower driveline also brakes automatically. Because the service brake acts only as a support, it is subject to minimal wear.
The Liebherr L 556 XPower wheel loader on display at Waste Expo 2019 Booth 976 features Liebherr's full guarding package. The package adds safety and value by protecting vital areas on the machine, including the tilt cylinder, windshield and lighting. The loader features particle protection and an air pre-cleaner; this combined with the optimal placement of the cooling package prevents debris contamination in the cooling components.
Wheel spin on the Liebherr L 556 wheel loader is prevented through continuous tractive effort control of the XPower driveline; combined with automatic self-locking differentials, tire wear is reduced by upwards of 25 percent. Accessing the engine on the L 556 XPower is safe and easy because critical maintenance points on the machine can be reached quickly, leading to faster turnaround times.
Operators will find a roomy, ergonomic cab design that exceeds their day-to-day requirements. This sets the ideal conditions for comfortable and productive work. The machine's controls are easily accessible and user-friendly and this comfort allows the operator to work efficiently and safely.
The A 914 Litronic delivers precision movements, safety and comfort
Liebherr has set a new standard with the A 914 Litronic wheeled excavator. It has high traction, and a 143 horsepower engine that provides fast acceleration and outstanding lifting capacity. A short rear swing radius makes this machine ideal for sites where the excavator will work in close quarters. Many years of experience in developing and producing hydraulic excavators enables Liebherr to coordinate every component and system on the machine.
The result of this is evident every day: Liebherr hydraulic excavators deliver rapid, fluent and precise movements. Joysticks enable the operator to intuitively and easily control the hydraulic system to complete challenging tasks quickly.
Buttons on the joysticks, which the operator can configure, deliver additional convenience and functions. In fact, the optional joystick steering function enables the operator to steer the wheeled excavator. Working and travelling movements can be executed simultaneously using the mini-joystick.
A wide range of equipment, such as pipe fracture safety devices on lifting and stick cylinders, load holding valves on outriggers, lift limitation in height, overload warning device, a roll-over protection system (ROPS) and an emergency exit through the rear window deliver maximum safety for every job.
Operators are often in machines for hours at a time and the A 914 provides a comfortable working environment, which improves productivity and efficiency. Liebherr equips the A 914 with a standard automatic air conditioning system to ensure the operator's comfort. The temperature, fan setting and all air vents can be adjusted through an intuitive touchscreen. Fogged up windows can quickly be cleared with the touch of a button, and the filter for the cab air can be changed from outside.
The A 914 is also has features that help the machine take care of itself. They include a reversible fan that can blow dust free from the radiator and protective screen. The fan operates on adjustable time intervals or the operator can reverse the fan on demand. An automatic central lubrication system greases the upper carriage and attachments at intervals set by the operator, which avoids damage caused by infrequent lubrication. This is especially helpful for maintaining equipment longevity in an environment like waste management, where machines may operate eight hours a day, six days a week.
In addition, an optional Liebherr radio is MP3-compatible, has a USB connection and can be used as an interface for a hands-free kit. If the machine operator connects a smartphone to the radio using Bluetooth, the touchscreen can be used to control all media in the machine - the radio, MP3 or phone calls.
More from Shows & Events
The Recycling Council of Alberta (RCA) 2019 Waste Reduction Conference "Sea Change" is set to be held October 2-4, 2019 at The Fairmont Jasper Park Lodge in Jasper, Alberta.
Three years have passed since the last K, the world's premier fair for the plastics and rubber industry, and everything has changed. Apart from the media attacks on plastic products, the industry also has other challenges to overcome, such as China's import ban on plastic waste and constantly increasing recycling quotas entering into force.
After the success of last year's inaugural event in Canada, the Environmental Research & Education Foundation of Canada (EREF-CA) is excited to once again hold its Silent Auction, October 9 and 10, at the Canadian Waste & Recycling Expo (CWRE) in Toronto, Ontario. Proceeds from this event, which is being held in partnership with the Ontario Waste Management Association (OWMA), support solid waste research needs in Canada.
"Digitalization will significantly change today's circular economy," according to Naemi Denz, the Managing Director of the Waste Treatment and Recycling Association in the German Engineering Federation (VDMA). Denz says that digitally transmitted information, for example, will ensure that secondary raw materials can be designed with even greater precision. This topic will be among many at IFAT 2020, set for Germany in May, 2020.
Compost Council of Canada's National Organics Recycling Conference 2019 set for Guelph, September 25-27
The Compost Council of Canada's National Organics Recycling Conference 2019 is set for Guelph, Ontario, September 25th through 27th. The title of this year's conference: Recycle Your Organics • Return Life to our Soils.
The Solid Waste Association of North America (SWANA) is excited to announce the keynote speaker lineup for its WASTECON 2019: Pathway to Innovation conference to be held in Phoenix, Ariz., on October 21-24, 2019. Attendees at this year's conference will hear from recycling industry experts and innovative leaders about sound strategies to improve their recycling performance and plan for the future thanks to our Keynote lineup.
Ettlinger, a member of the Maag Group, will take advantage of the upcoming K 2019 in Germany this October to unveil the company's brand new ERF 1000 high performance melt filter for very high throughputs in recycling applications for plastic materials. The company will present it's new technology at Stand A04 in Hall 9, during this year's K 2019, the world's largest trade fair focused on plastics and rubber.
As scrap recyclers and brokers continue to seek new outlets for recycled commodities, market participants are increasingly interested in where demand will come from next. To meet that need, the Institute of Scrap Recycling Industries' (ISRI) 2019 Commodity Roundtables Forum will offer fresh new perspectives and insights on the commodity markets and examine "the next boom market." The annual event which attracts processors, brokers, traders, and other scrap recycling professionals, will take place this year from September 11-13 in Chicago.
Visitors attending the renowned RWM exhibition (11-12 September) in Birmingham, England, will have the opportunity to learn about Tidy Planet's turnkey Waste-to-Energy (WtE) plants, which feature pioneering solid waste boiler regulating technology - the Artificial Vision System (AVS) - from Sugimat.
The Secondary Materials and Recycled Textiles (SMART) Association's 2019 Regional Meeting takes place September 15-16, at the Renaissance Raleigh North Hills Hotel in Raleigh, North Carolina. The meeting, themed "Focus on the Future," will feature experts from academia and the textile reuse and recycling industry to provide attendees a glimpse into emerging issues and trends.
The Solid Waste Association of North America (SWANA) has announced the 2019 SWANA Safety Award recipients, chosen by the SWANA Safety Committee. These awards recognize those who have demonstrated a profound commitment to improving employee safety through communication, best practices, training, and policies. Two organizations are honored this year with the Biggest Safety Improvement Award and the Best Safety Innovation Award.
Spend 2 days of business interaction, product discovery, education and more at the 22nd edition of Waste & Recycling Expo. Attracting more than 3,000 industry professionals, this premier event is Canada's ONLY trade event serving the waste, recycling and public works markets. From transportation and sustainability to composting and construction, more than 300 companies will be showcasing the latest equipment and services hitting the market. Join us this October 9-10 at the Enercare Centre in Toronto.
Canadians know that we need to find new ways to reduce our waste and use our resources more efficiently. When we don't properly recycle and reuse materials, letting them become landfill instead, it is economic value we are throwing away.
The new Freightliner EconicSD™, the only cab-over-engine refuse truck in North America that features a collision mitigation system, will be on full display this year at WasteExpo 2019. The innovative, low-entry waste collection truck will be showcased in the Freightliner booth (#1402) along with an array of work truck solutions for the waste collection industry.
The highly anticipated Mack LR battery electric vehicle (BEV) will grab the spotlight in Mack Trucks' booth at WasteExpo 2019, May 6-9 at the Las Vegas Convention Center. Built to meet the demanding needs of the New York City Department of Sanitation, the fully electric LR demonstrator will begin testing and evaluation later this year.
Scranton Manufacturing and its New Way Trucks brand of refuse truck bodies will debut the company's latest rear load body at the 2019 Waste Expo, May 7-9 in Las Vegas, NV. The new 25 cubic yard New Way Cobra HC adds high compaction (HC) to the Cobra line of rear loaders, and was designed to be the fastest and strongest in the lineup.
Wastequip is set to launch RockBox, a new ultra-heavy-duty roll-off container that combines extreme toughness and durability in a lighter-weight container. Made from wear resistant Hardox steel, the new roll-off containers are four times stronger than ordinary mild steel grades, while weighing 20 percent less and lasting twice as long as traditional heavy-duty roll-off containers. Wastequip's new hard and tough roll-off containers will be the first of their kind in the United States to be made of the innovative Hardox material. Wastequip is also a certified member of the Hardox In My Body program.
Wastequip will debut the products May 6-9 at Waste Expo 2019, booth #523.
TOMRA SORTING RECYCLING is set to unveil information about its new cloud-based program designed to connect customers' optical sorting equipment, during Waste Expo 2019. To be held at the Las Vegas Convention Center, South Hall, in Las Vegas, Nevada, May 6-9, show attendees visiting TOMRA's booth #2241 will be among the first to learn more about TOMRA Insight. The new technology unleashes the power of process data to transform sorting from an operational process into a strategic management tool, providing fact-based decision-making at every step of the value and production chain.
FleetMind Solutions, Inc. will be showcasing its latest, connected technologies for waste fleet management at Waste Expo 2019, May 7-9 at the Las Vegas Convention Center in Las Vegas, Nevada. Waste Expo is the largest waste, recycling and organics trade show and conference in North America.
End of Waste Foundation Inc., a public-service corporation based in California, attended ISRI2019 Convention and Exposition in Los Angeles, held April 8th-11th, 2019. With rising concerns with global warming, End of Waste's first traceability software, based on blockchain technology, is providing a tangible solution to what the company calls a broken system in the recycling industry.
With more than 620,000 visitors from over 200 countries, bauma 2019, the world's leading trade fair for construction machinery, building material machines, mining machines, construction vehicles and construction equipment, generated the best results in the exhibition's 65-year history. The number of visitors rose by about 40,000 over the total produced during the previous event in 2016. More than 250,000 visitors came from countries outside Germany. The top 10 visitor countries after Germany were: Austria, Italy, Switzerland, France, the Netherlands, Russia, Sweden, the Czech Republic, Poland and Great Britain. The trade fair also experienced a strong increase in attendance from overseas visitors. Significant gains in this group were produced by China, Australia and Japan. More than 5,500 visitors came from China alone. The number of exhibitors totaled about 3,700 from 63 countries - likewise a record.
ISRI 2019 began Monday night with the show's traditional opening night reception. Close to 300 exhibitors are at this year's event, along with several thousand registered attendees. On the show floor, companies are showing off the latest expertise, equipment, technology, systems, software, services, parts and more for the scrap recycling industry. ISRI sessions through the week are focused on operations, the latest technology and equipment as well as global markets for metals, plastics, paper, tires and e-waste.
Liebherr USA, Co. Construction Equipment division is displaying two high performing material handlers and the most efficient wheel loader in the industry at the Institute of Scrap Recycling Industries 2019 convention and exposition in Los Angeles, California, to be held April 8-11.
Members of the metals sorting team from global sensor-based sorting leader, TOMRA Sorting Recycling, will be on hand in TOMRA booth # 800 to meet with attendees during ISRI 2019 in Los Angeles , Calif., from April 8-10. Team members will be available throughout the show to address attendees' specific sorting challenges and how TOMRA's X-ray and color sorting technologies can help to deliver solutions.
The leaders of the C&D recycling industry gathered in Brooklyn, NY - March 10-12 to hear an economic forecast for their industry, how to get and retain workers, and several materials specific sessions as part of C&D World 2019.
Within the automotive recycling industry there is growing concern about future economic developments, according to a survey of participants at the International Automobile Recycling Congress, IARC 2019, taking place this week, March 20-22, in Vienna. The survey shows that around 38 per cent expect economic conditions for the automotive recycling industry to deteriorate over the next two years. A similarly high percentage, however, think business will remain stable. Only just over one quarter of those surveyed expect economic conditions to improve.
Rotochopper owners and operators gathered at Rotochopper's manufacturing facility in St. Martin, MN for training the last two weeks of February. The customer service department hosts Rotochopper University annually for companies that have purchased Rotochopper grinders during the past year.
Global Recycling Day 2019 is today, March 18, and people around the world are joining in the celebrations to mark the day. With events from beach clean ups to high school litter picks, and football challenges to school visits taking place in Europe, Asia, Africa, North America and South America, every corner of the globe is uniting to celebrate the importance of recycling.
TerraCycle CEO, Tom Szaky announced as closing keynote speaker for Responsible Business Summit New York
Tom Szaky, president and CEO of international recycling company TerraCycle® is pleased to announce he has been selected as a closing keynote speaker at the 7th annual Responsible Business Summit New York, scheduled for March 18-19.
Frontline Machinery hosted their annual Demo Days & Open House event today at the company's headquarters in Chilliwack B.C.. About 200 customers, industry partners, OEMs and staff were in attendance to see the latest innovations from Frontline equipment partners, including global crusher/screener manufacturer Keestrack, Optical Belt Scale manufacturer Sensortechnik and screen/shredder and mobile conveyor manufacturer EDGE Innovate. Also in attendance was Langley-based Shearforce Equipment which demonstrated their latest hydraulic pulverizer attachment.
Refuse and recyclable material collectors rank fifth on the U.S. Department of Labor's Bureau of Labor Statistics' list of most dangerous jobs. In 2017, the National Census of Fatal Occupational Injuries identified 30 fatalities among these collectors. This year, in January alone, 17 fatal incidents have occurred in the solid waste industry in the United States and Canada, with two taking place in New York.
The 2019 edition of the National Heavy Equipment Show is quickly approaching this March 28 and 29 at the International Centre in Mississauga. With a sold-out show floor and thousands of visitors pre-registered, the key trade event is ready to mark its 22nd year in just three weeks' time.
Building on its reputation as the premier recycling industry event in the world, the Institute of Scrap Recycling Industries (ISRI) 2019 Convention & Exposition will add a Residential Recycling Summit to its lineup of educational workshops. Through a seven sessions it will deep dive into the issues surround plastics, paper and residential recycling industries.
In June, the Recycling Council of Ontario (RCO) is hosting a first-of-its-kind Circular Procurement Summit, over three days, from June 11-13, at the Sheraton Centre Toronto Hotel. The conference aims to unite all levels of government, suppliers and vendors, and experts from leading jurisdictions to ignite the transition to the circular economy in cities and regions across Canada.
Canada's only trade event for the waste, recycling and public works markets has launched its attendee registration platform for its 22nd edition to be held October 9 - 10, 2019 at the Enercare Centre, in downtown Toronto.
Terrafirma Equipment Sales & Rentals will be holding Customer Appreciation Days, August 23–25 in Edmonton, Alberta.