Recycling Product News Logo

This ad will close in 15 seconds

Indexator expands XR hydraulic rotator range

Smaller XR 300 model designed for both rigid and dangle mounting slew bearings in applications from scrap to forestry and oil & gas

Indexator expands XR hydraulic rotator range

Indexator has launched a smaller model, the XR 300, as part of the company's XR range of hydraulic rotators. The XR range comprises compact, powerful rotators with heavy-duty bearings, designed for extreme applications where rotator function requirements and load capacities are especially high. Units are optimally designed for both rigid and dangle mounting slew bearings, high performance and long service life, for handling large loads. 

The new XR 300 is designed to handle both positive and negative axial loads up to 9 tonnes. The model is also built for a radial load tolerance of 7 tonnes and is thus ideal for applications with high side loads such as rigid mounting sorting grapples on excavators, or dangle mounting, ideal for application in  scrap or timber handling, as well as oil & gas applications. 

In common with other models in the XR series, the XR 300 has a patented torque transfer design. "In a nutshell, the technology means the swivel and motor are not affected by external forces, which provides major service life benefits compared to competing solutions," says Johnny Karlsson, Area Sales Manager at Indexator. Thanks to the XR-series' patented torque transfer solution, external forces acting on the bearings do not affect the motor and swivel inside the Rotator. This extends service life significantly in comparison with competing solutions.

Another feature that benefits service life is Indexator's tried-and-tested vane motor - the only compact rotator on the market using this principle. While the vane motor provides high torque, it is also very forgiving in case of forced roation and large slewing masses. The modular design with slew bearings, motor and swivel in separate modules, makes service and maintenance easy. "There's never room for unscheduled downtime anywhere rotators are used. Because they simply have to keep on working, hour after hour, high reliability is just as important as high-performance," says Johnny Karlsson.

In common with other models in the XR series, the XR 300 has a patented torque transfer design. "In a nutshell, the technology means the swivel and motor are not affected by external forces, which provides major service life benefits compared to competing solutions," says Johnny Karlsson, Area Sales Manager at Indexator. Thanks to the XR-series' patented torque transfer solution, external forces acting on the bearings do not affect the motor and swivel inside the Rotator. This extends service life significantly in comparison with competing solutions.

Another feature that benefits service life is Indexator's tried-and-tested vane motor - the only compact rotator on the market using this principle. While the vane motor provides high torque, it is also very forgiving in case of forced roation and large slewing masses. The modular design with slew bearings, motor and swivel in separate modules, makes service and maintenance easy. "There's never room for unscheduled downtime anywhere rotators are used. Because they simply have to keep on working, hour after hour, high reliability is just as important as high-performance," says Johnny Karlsson.

Patented torque transfer solution.

To make sure the XR 300 can do the job, it has been rigorously tested, both in a test environment and in the real-world scenario's machines and tools encounter. The result is a rotator with long service life that delivers performance every day.

The XR 300 is a rotator size eagerly awaited by customers, and market demand is high, especially from the customers who saw the rotator's benefits when they participated in the prototype tests. Indexator will begin series production at the end of the year and as of January 2019, the XR 300 will be in full production.

"There is great demand from machine manufacturers and every possibility that this size segment will be the largest in the entire XR series in terms of volume," says Karlsson. The XR range is available in several sizes and models with different bolt patterns and extra channels for central lubrication and cable pass through.

See the new XR 300 and other XR-rotators working in the video below.   

Thanks to the XR-series' patented torque transfer solution, external forces acting on the bearings do not affect the motor and swivel inside the Rotator, extending service life significantly.

To make sure the XR 300 can do the job, it has been rigorously tested, both in a test environment and in the real-world scenario's machines and tools encounter. The result is a rotator with long service life that delivers performance every day.

The XR 300 is a rotator size eagerly awaited by customers, and market demand is high, especially from the customers who saw the rotator's benefits when they participated in the prototype tests. Indexator will begin series production at the end of the year and as of January 2019, the XR 300 will be in full production.

"There is great demand from machine manufacturers and every possibility that this size segment will be the largest in the entire XR series in terms of volume," says Karlsson. The XR range is available in several sizes and models with different bolt patterns and extra channels for central lubrication and cable pass through.

See the new XR 300 and other XR-rotators working in the video below.   

More from Metals Recycling

E-crane to handle over 500,000 tons of materials yearly at MetalX’s new mega-shredder

MetalX, headquartered in Waterloo, Indiana, has begun operation of a new 5,000-hp mega-shredder at the company's recently established greenfield site in Delta, Ohio. In December 2018, MetalX also installed a new E-Crane 1000 Series Model EC7317 PD-E stationary equilibrium crane, equipped with a 3.5-cubic-metre (4.6-cubic-yard) scrap grapple. Since installation, the E-Crane has been used to move and stockpile material in preparation for the shredder startup. Now that the shredder is operational, the E-Crane will be used primarily to feed the shredder at a rate of up to 300 tons per hour.

Optical sorting, robotics and AI to drive MRF market towards $251.7 million by 2022 according to latest analysis

With China's National Sword regulation imposing restrictions on the import of solid wastes, US single-stream recycling material recovery facilities (MRFs) are left with few options for processing their vast quantities of recycling materials. The technology and capabilities gap between the advanced foreign facilities and the domestic facilities are compelling the latter to make strategic investment decisions regarding processing equipment. While operations and business models will undergo major changes, it is processing technologies such as optical sorting, robotics, and Artificial Intelligence (AI) that will drive the $185.2 million market towards $251.7 million by 2022, at a compound annual growth rate of 6.3 percent. 

Skrotfrag robotic sorting line for scrap equipped with three-armed ZenRobotics Heavy Picker

Swedish scrap processing company Skrotfrag installs a robotic sorting line for scrap metal. The sorting line, equipped with a three-armed ZenRobotics Heavy Picker, will be the third of its kind in Sweden. Skrotfrag will be one of the first companies to apply robotic sorting technology to scrap metal. The application is a welcomed addition to advance Skrotfrag's operations.

​ISRI announces 2019 Advocacy Agenda following significant achievements in 2018

Despite a year filled with political gridlock and uncertainty in U.S. politics, the Institute of Scrap Recycling Industries (ISRI) achieved a number of important victories benefiting recyclers in 2018. According to the organization, this sets the stage for the organization's 2019 Advocacy Agenda, which recognizes new challenges and opportunities in the industry at the local, state, federal, and international levels related to Market Development & Economic Opportunity, International Trade, Energy and the Environment, Transportation & Infrastructure Development, Workplace Safety Initiatives, Workforce & Immigration Issues, and Regulatory Policy.

International law enforcement recognizes recyclers as partners in effort to reduce metals theft

As a sign of both the need to reduce metal theft, and its strong working relationship with the Institute of Scrap Recycling Industries (ISRI) and other recyclers, the International Association of Chiefs of Police recently passed a resolution calling on law enforcement agencies to recognize recyclers as partners, use tools such as ScrapTheftAlert.com, and utilize resources developed by ISRI. 

free-paper-airplane

Get our newsletter

Learn more

​TOMRA Sorting Recycling adds to product support team in North America

TOMRA Sorting Recycling has announced two additions to their North America product support team. Sean Hyacinth has been added as a field service engineer for TOMRA optical sorting equipment, while Kevin Javier Montalvo assumes the newly created position of customer project manager, recycling. Both team members will work directly with TOMRA dealers and customers to strengthen equipment service and project management throughout North America. 

​ISRI's 2018 Industry Yearbook confirms recycling industry resilience in year of change

The Institute of Scrap Recycling Industries (ISRI) recently announced the release of its seventh annual Recycling Industry Yearbook, providing the most up-to-date information and statistics about the U.S. recycling industry and global scrap marketplace. With a greater spotlight on the industry in the wake of rising trade protectionism around the globe, the publication provides the most comprehensive analysis of where the industry stands based on the most current data compared to previous years. It will also serves as a baseline for years to come based on the new global market realities.

A look at the 2018 nonferrous market: the Wrath of the Goddess of the Earth

This year has gone down as one of the toughest years in many for the global nonferrous scrap industry and the recycling industry overall. With new initiatives getting launched in every corner of the world to reduce waste and increase material recycling for the manufacture of new products, one would think there would be less ending up in our landfills. Unfortunately, that simply has not been the case.

Matt Zubick – CARI’s newly appointed chair – is focused on helping members navigate the transition back to domestic self-sufficiency

Matt Zubick was appointed as the new Canadian Association of Recycling Industries (CARI) Chair at this year's Annual Convention, held in Niagara Falls, Ontario, in June. Zubick has been in the scrap business his entire working life and is currently manager at London, Ontario-based John Zubick Scrap Metals Ltd., started by his grandfather after he served in the Canadian Navy during the Second World War. 

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

​ISRI partners with EPA and others to extend Mercury Switch Recovery Program

The Institute of Scrap Recycling Industries (ISRI) has joined with the U.S. Environmental Protection Agency (EPA), and other stakeholders, in the signing of a memorandum of understanding (MOU) to extend the National Vehicle Mercury Switch Recovery Program (NVMSRP) to 2021. The highly-effective program was designed to recover mercury switches in older model vehicles during the recycling process before the mercury can leak into the atmosphere. Such switches were mainly used to control automatic lights in vehicles. 

New conveyor feed boosts yield of Eddy Current Separator

The conveyor feed recently developed by Goudsmit Magnetics consists of a conveyor belt feed that is supplied by a product distributor. This prevents clogging of the vibratory chute during the recycling process and increases the yield of non-ferrous metals. Sticky or damp product streams, such as incinerator bottom ash (IBA) and refuse-derived fuel (RDF) adhere to the surface of vibratory chutes, preventing them from distributing the product evenly. The product takes on a preferred orientation (the path of least resistance) preventing formation of a homogeneous layer, which results in reduced yield of non-ferrous metals.

​Globe Metal adds new Kajman 1000 Alligator Shear from Gensco

Montreal, Quebec based Globe Metal recently purchased a brand new Kajman 1000 Alligator Shear. This new machine allows Globe Metal to shear stainless pipe and plate to produce foundry-grade cut plate prepared for any customer's specifications. It is also capable of producing any size of Ferro additives as per their customers' exacting requirements.  

free-paper-airplane

Get our newsletter

Learn more

TOMRA's new-generation X-TRACT features dual processing technology, multi-density channels and application packages

TOMRA Sorting Recycling has introduced a new generation of X-TRACT machine with advanced sorting technology that allows a broader range of market segments to take advantage of its ability to boost purity levels. Today's XTRACT features innovative Dual Processing Technology to enhance final purity levels; multi-density channels for more precise classification and sorting of materials; and a broad range of application packages.

Sierra Recycling and Demolition has built success at the scrapyard based on reliable equipment, advanced technology and solid culture

Shortly after World War II, Ben Sacco came to California and started Sierra Bag Company, servicing the agriculture industry. In the late fifties, Sierra Iron & Metal was born when he dedicated a portion of his operation to scrap metal collection. He then added a baler to process scrap, which he found while visiting his homeland of Italy. Sacco eventually became the official North and South American distributor for the baler manufacturer, starting Sierra International Machinery, while at the same time continuing to operate his scrapyard, Sierra Iron & Metal. About 10 years ago, the business was passed on to Ben Sacco's two sons, John and Philip Sr., both of whom have been lifelong employees and contributors to the business. The scrap recycling part of the Sacco family business today operates as Sierra Recycling and Demolition Inc., run by Phil Sacco, while Sierra International Machinery, the recycling equipment manufacturer and distributor, is run by John Sacco - both out of Bakersfield, California. 

Pioneering program educating Ontarians about how to identify and divert mercury-containing products

Scout Environmental has expanded Mercury Roundup: a ground-breaking program that educates Ontarians on the dangers of mercury — a toxic heavy metal — and empowers them to bring mercury-containing products to their local household hazardous waste facilities for safe recycling. With generous funding from the Ontario Trillium Foundation, Scout partnered with the Region of Peel on a program pilot in 2016. The City of Peterborough and the City of Barrie joined in 2018, and together these three municipalities have collected over 670 mercury-containing items to date. Scout Environmental plans to expand Mercury Roundup to four more municipalities by 2021. 

Building Tomorrow: Volvo goes all in on wheeled excavators for North America

Volvo Construction Equipment demonstrated that they are dedicated to the growing North American wheeled excavator market during their fall press briefing at their Shippensburg, Pennsylvania, manufacturing and customer experience facility. According to the company, the wheeled excavator market in North America is on pace for 23 percent growth in unit sales for 2016–2018, while Volvo is on pace for 60 percent growth in share of total unit sales for North America in 2016–2018. During that time, Volvo has introduced seven new models of wheeled excavator, including three replacement models. These models cover six size classes ranging from the 5- to 9-ton class to the 23-ton class, and include the introduction of Volvo's first dedicated material handler for North America, the EW240EMH.

In the fight against metal theft, focus of efforts needs to be on thieves, not recyclers

As metal prices rise, criminals increasingly target easy and obvious material. Utility providers are often the chosen victim, and thieves often inadvertently expose high-voltage power sources at theft locations. They can knock out power or phone capacity, including 911 services, to entire neighbourhoods, and delay public transportation. Metal thieves place themselves, utility employees, first responders and even the general public in danger when they attempt to burglarize telecommunications and electrical substations.

Rigaku demonstrates improved handheld LIBS capabilities

Rigaku Analytical Devices will demonstrate its newest handheld analyzer for metal alloy analysis at the International Manufacturing Technology Show (IMTS), taking place at McCormick Place in Chicago, Illinois, this week, through September 15.  The Rigaku KT-100S laser induced breakdown spectroscopy (LIBS) handheld analyzer provides an alternative for identification of a larger number of alloys in less than two seconds, in a truly ruggedized form factor for use in the toughest environments, including scrap recycling, fabrication shops and other plant environments.

Bridgestone expands OTR line to include new tire for underground mining, landfill and salvage

Bridgestone Americas, Inc. has announced the expansion of its off-the-road (OTR) product portfolio to include a new size of the Bridgestone VSMS2 tire. The tire is now available in size 29.5R25 in the U.S. and Canada. Designed for underground mining, landfill and salvage environments, the Bridgestone VSMS2 tire delivers a 30 percent decrease in the frequency of sidewall cuts, improving the tire's overall life cycle performance by five percent.

All-new MAXAM MS706 solid skid-steer tire features zero maintenance and extreme durability

The new MAXAM MS706 CONSTRUCTION PRO solid skid-steer tire is ideal for the most extreme applications. According to MAXAM Tire North America, the all-new MS706 features extra deep tread, allowing for 3 to 5 times longer tire life versus traditional pneumatic tires with a more robust tread pattern specifically designed for harsh working applications, including asphalt recycling, road paving, concrete work and metal recycling centres.

The latest shear/baler/loggers provide scrap metal recyclers with the versatility needed to profit and grow

As a category of heavy-duty machine engineered specifically to provide scrap recyclers with the versatility to process heavy metal materials as well as light metals - creating logs, bales or sheared-to-length material, ready for efficient transportation to buyers - the growing popularity of shear/baler/loggers (SBLs) is not surprising. 

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more