Recycling Product News Logo

This ad will close in 15 seconds

Doppstadt to showcase the "INVENTHOR Type 9" shredder at IFAT

INVENTHOR first machine in an entirely new generation of Doppstadt shredders

The INVENTHOR Type 9 shredder is the first machine in an entirely new generation of Doppstadt shredders.

The INVENTHOR Type 9 shredder is the first machine in an entirely new generation of Doppstadt shredders.


Doppstadt's INVENTHOR Type 9 shredder, from the SMART SHREDDING LINE, is a new high-performance machine that is setting new market benchmarks when it comes to quality and performance. By bringing together the most innovative mechanical developments, innovative control and regulation systems, and a brand new noise emissions concept, Doppstadt has created an environmentally friendly cost-effective one-stop solution for the recycling sector. Thanks to its modular service-oriented construction and range of suspension variants, this machine is equally suited to use as a stationary fixture or in the service industry sector.

A new concept for the smart shredder generation 
The INVENTHOR Type 9 is the first machine in an entirely new generation of Doppstadt shredders. Everything, from the drive to the housing and the quick-change tools has been designed with an eye to the future. The new VarioDirect Drive demonstrates its quality right from the start. It handles even the toughest shredding tasks without any loss of performance, giving it scope for future development and job-specific programmes. From shut-down to running at maximum power, the shredding roller gets to work immediately, even under a full load. One of Doppstadt's highest priorities is to reduce exhaust and noise emissions: The INVENTHOR Type 9 meets the Euromot Stage IIIA and IV exhaust emission requirements and will also meet Stage V, when updated. It also performs all its tasks with very little noise. This shredder also features a new range of solutions when it comes to accessibility. The shredding comb provides generous access to the shredding space, meaning tools can be exchanged quickly and ergonomically. Large new glass fibre doors make daily maintenance tasks easier.

Strong and innovative: this new shredder's name says it all. Doppstadt fused "inventor", representing ingenuity, with "Thor" the Norse god, for strength, when naming the machine. Here, "Thor" stands for Thor's hammer, his magical weapon.

At IFAT, Doppstadt will present the INVENTHOR Type 9 shredder to the world. A knock-out machine for the international market, this machine is built in Germany.

Visit daily live presentations with the INVENTHOR Type 9 at the VDMA "biomass" demo area at IFAT. Doppstadt at IFAT: Hall B6, Stand 439/538.

The Inventor Type 9 shredder is a high-performance solution for processing a range of waste materials, including biomass, scrap wood and mixed construction waste.

More from C&D Recycling

Keestrack optimizes electric drive technology

Keestrack offers today the most versatile range of hybrid and plug-in solutions in mobile processing technology for quarrying and recycling applications. This applies to the complete product range, from screening plants and stockpile conveyors to mobile track-mounted crushing solutions of all relevant technologies and for all production capacities.

Powerscreen of Canada to show latest crushing and screening plants at National Heavy Equipment Show

Powerscreen is one of the world's leading providers of mobile crushing, screening and conveying equipment. Official distributors, Powerscreen of Canada will exhibit at the National Heavy Equipment Show in Toronto, from March 28-29th, 2019. Exhibiting at booth number 5004, experts will be on hand to talk crushing and screening and visitors will have the opportunity to get up close to a Powerscreen Chieftain 2200 screen.

free-paper-airplane

Get our newsletter

Learn more

LEED changes a boost for C&D

Construction and demolition (C&D) materials are hefty. It is why we can so effectively build roads, bridges and buildings out of them. It's also why, by weight, they are the most significant material in the North American waste stream. This creates a challenge for recycling, as it's usually too expensive, in terms of ROI, to ship most recovered C&D end products, including wood, concrete, drywall, asphalt, and asphalt shingles.

​Rubicon Global and State Farm Arena divert nearly 12 tons of waste from landfills

Rubicon Global, the Atlanta-based technology company that provides waste, recycling and smart city solutions to businesses and governments worldwide, has successfully diverted nearly 12 tons of waste destined for landfills from State Farm Arena during last week's festivities in Atlanta, Georgia. This waste was generated as a result of five events being held at the State Farm Arena leading up to and in support of the ‘Big Game.'  

Ecowaste Industries to add to C&D materials transfer and MRF capacity

Ecowaste Industries operates the Ecowaste Landfill in Richmond, B.C. where they accept inert refuse, mainly from construction and demolition activities. This material is renewed into products such as compost, bark mulch and crushed concrete for sale. At the end of 2018, Ecowaste Industries Ltd. acquired the operating assets and facilities of Urban Wood Recycling and Smithers Enterprises, both based in Vancouver.  The transaction was approved by both parties on November 21, 2018 and the sale closed on December 31, 2018. Since the start of the year, Ecowaste has been accepting Urban and Smithers customers at the Ecowaste Landfill in Richmond. 

New sidewall protection for OTR tires designed for concrete and aggregates recycling

At concrete and aggregate recycling sites, recycled aggregate is produced by crushing concrete and asphalt to reuse the aggregate in the construction industry as a base for roads or building foundations.  To keep operations running site managers rely on loaders to push large jagged chunks of torn up sidewalk, roadway or building materials - which can contain steel rebar - to the crushing line to reduce its size.

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Cat multi-processors feature quick-change jaws, greater cutting/crushing forces, increased speed, durable design

Three new Cat MP332, MP345 and MP365 Multi-Processor models are heavy-duty, high-production tools that accept multiple interchangeable jaws for taking on a variety of specialized demolition tasks. The new models, compared with previous models, can cycle 50 percent faster and generate up to 19 percent greater cutting/crushing forces. An innovative locking system enables a single operator to typically change jaw types in 15 minutes or less, using only standard hand tools. An included stand securely and stably holds unused jaw sets.

  • Concrete Cutter: outer jaw cracks concrete, inner jaw shears steel
  • Demolition: cracks thick concrete structures
  • Pulverizer: crushes concrete, separates rebar
  • Shear: cuts structural steel, pipe, cable
  • Tank Shear: cleanly cuts tanks or plate steel at right angle on three sides
  • Universal: cuts steel and crushes concrete

Metso to expand NW Rapid crushing plant range

Metso is introducing new higher capacity models to its popular wheel-mounted Metso NW Rapid series. In addition to a bigger jaw crusher model, the NW Rapid units are now also available with a variety of robust cone crushers, including the first model with the MX crusher. Easily transportable using standard prime movers, over a thousand NW Rapid models have already been sold into aggregates and C&D recycling applications.

Anaconda Equipment joins McLanahan family of companies

In 2017, McLanahan Corporation began a partnership with Anaconda Equipment of Northern Ireland to distribute and sell Anaconda's line of mobile track equipment. As the relationship between the two companies progressed, it became clear that their values and business styles were closely aligned. Today, the two companies are proud to announce that Anaconda Equipment will officially join McLanahan Corporation's family of companies upon legal closing within the next 30 to 60 days.

Latest mobile dust suppression design features Tier 4 Final Gen Set

BossTek has updated its family of self-powered dust suppression equipment with Tier IV Final-compliant generators, ensuring compliance in all 50 states and Canada.  BossTek made the announcement with the debut of the new DustBoss DB-60 Fusion, a field-proven suppression system driven by a high-reliability 25 HP electric motor and paired with a gen set powered by a heavy-duty 4-cycle indirect injection diesel engine.  Designed, engineered and assembled in the USA, the generator features a dual-containment fuel cell, heavy gauge lockable enclosure and oversized brushless alternator for easy starting.  

Customer feedback based on proven designs is shaping the latest wood waste processing machines

Multiple major manufacturers of horizontal grinders have released new models in 2018. HOGS, as they are sometimes called (HOrizontal GrinderS), are unquestionably the workhorse of the wood recycling industry and are a key piece of equipment for composters, land clearing contractors and biomass-for-energy producers, as well as C&D and MSW processors, where in both cases, wood and other organics are part of a mixed stream of materials. The latest model horizontal grinders feature lighter weights with higher production, increased transportability and site mobility, diesel, hybrid and fully electric power options, along with sophisticated controls systems, and ease of use and maintenance for operators and owners. This article looks at the latest horizontal grinder models and updates from Morbark, CW Mill, Rotochopper, CBI, Diamond Z, Bandit, Vermeer, Precision Husky, and Peterson Pacific.

​New Brokk 170 offers 15 percent more power while retaining compact build

Brokk, the manufacturer of remote-controlled demolition machines, has introduced the Brokk 170. With SmartPower – the company's signature intelligent power management system – the new machine offers 15 percent more power than its predecessor, the Brokk 160, but retains the same compact dimensions. The Brokk 170 is one of four new next generation Brokk remote-controlled demolition machines Brokk is launching at World of Concrete 2019 at booth C4249 in Las Vegas.

F-Class portable plant from Haver & Boecker includes new technologies

Haver & Boecker has launched the Tyler F-Class portable plant that includes several new technologies to improve setup time and extend equipment longevity in quarry and mining operations. The portable plant features a new custom-built chassis equipped with six hydraulic run-on jacks that quickly level the plant, eliminating the need for cribbing. The run-on jacks also ensure the chassis stays level during operation, which minimizes equipment wear. 

free-paper-airplane

Get our newsletter

Learn more

Need to recycle highlighted at Circular Driven Economy Symposium 2018

Delegates from all over the world joined together at the inaugural Circular Driven Economy Symposium in London on the 18th - 19th September, to learn more about the opportunities in recovered construction and demolition waste material (C&D waste). Speakers from research bodies like SINTEF, academic institutions like Queen's University Belfast, construction and manufacturing firms like LafargeHolcim and Mapei, and the European Commission all provided plenty for delegates to think about. 

West Salem Machinery wood waste grinders feature easy maintenance and long-term productivity

West Salem Machinery (WSM) offers rugged and reliable Horizontal and Vertical Grinders/Hogs, as well as screens and conveyors. WSM  wood waste processing machines feature a unique pivoting top case  that allows access to preventative maintenance areas, with all infeed components remaining in place. According to the Oregon-based manufacturer, their Ballistics Infeed Chute, included on their line of Vertical Grinders is a unique design that helps capture tramp metal and other uncrushables - helping to protect the grinder rotor and reduce maintenance expenses.  

Morbark hosts 12th Demo Days, debuting new 23X Chiparvestor and showing latest grinders and chippers

Morbark's Demo Days event always brings a great deal of excitement to the area and its guests, and this year was no exception! From September 26-28, Morbark welcomed more than 250 guests within the forestry, biomass, recycling, sawmill and tree care industries from 14 countries for its 12th Demo Days event!

free-magazine-subscription

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more