Recycling Product News Logo

Momentum Fuel Technologies introduces new CNG systems at Waste Expo

Announcements include new tailgate system, CNG fuel management module drop-in and live CNG vehicle data and fuel usage reports

Momentum Fuel Technologies introduces new CNG systems at Waste Expo

Momentum Fuel Technologies made several major announcements this week at Waste Expo 2017. The company has added a 115 diesel gallon equivalent (DGE) tailgate system to its lineup of compressed natural gas (CNG) fuel system solutions for Class 6 to Class 8 trucks, with the largest fuel capacity available on the market, as well as a new Fuel Management Module (FMM) Drop-In Replacement, and the availability of live CNG vehicle data and fuel usage reports through a partnership with Geotab.  

Momentum’s tailgate system was designed for E-Z Pack, who had previously used five- and six-tank tailgate systems on its refuse bodies. “We set out to design a system for E-Z Pack that could contain the same or increased fuel capacity as their old system but with reduced weight, to keep costs in check,” said Zimmerman. “We were able to increase capacity from 105DGE to 115DGE using only three tanks, and this system is 400 pounds lighter than E-Z Pack’s previous system,” Zimmerman added. The system is designed to be scalable, with a smaller, two-tank 75DGE system available as well.

“We are pleased to add to our product line another great CNG solution to meet the unique and varied needs of the refuse industry,” said Mike Zimmerman, General Manager, Momentum Fuel Technologies.  “We are committed to supporting  the refuse industry with a complete offering of CNG options for all refuse applications.” Zimmerman added. 

With safety and convenience in mind, the system features a visible pressure gauge so drivers and technicians can see the pressure in the tank from ground level. The system’s tanks are at least seven feet off the ground with a steel guard structure around the base, designed to be safer in the event of a rear impact.  Further, the tailgate system keeps a lower profile than other CNG configurations, for enhanced safety of refuse vehicles.

All E-Z Pack units include a vertical fuel management module (FMM), which houses the electronics, fuel filter and fuel-fill receptacles and works in conjunction with the Rush Truck Centers’ telematics platform, allowing fleet managers to monitor usage and manage fuel consumption.  The vertical FMM is narrower than the version used in other Momentum configurations, taking up less valuable space on smaller truck bodies.

All Momentum products feature a fuel pressure regulator with a high-capacity filter manufactured by Parker.  This allows the system to operate from 3600 pounds per square inch (PSI) when full to a minimum of 230 PSI, so drivers can go even further on a tank of fuel.  The pressure regulator is designed to reduce leak points and weight, and the high-capacity filter is larger and designed to be serviced less frequently than competitive products.

Momentum Fuel Technologies offers the industry’s first complete CNG fuel system solution for Class 6 to Class 8 trucks, with support from design and manufacturing, to sales and ongoing service throughout the product life cycle.  The approach for this product line is based on innovative design, advanced safety features, installation expertise and the industry’s most comprehensive support network.

Momentum’s expansive product line includes six back-of-cab configurations (70DGE, 75DGE, 87DGE, 115DGE, 150DGE and 175DGE), three side-mount configurations (30DGE, 40DGE and 45DGE) and various roof-mount configurations that integrate with multiple body OEMs. The pressure regulator with high-capacity filter comes standard on all Momentum products.  New and replacement parts for this system are manufactured in-house by Momentum Fuel Technologies, ensuring quality and improving speed to customers.  With safety in mind, all high-pressure fuel lines in Momentum systems are painted yellow, for easier identification by technicians.  Momentum products feature an enhanced pressure relief device (PRD) system with eight fast flow PRDs to allow rapid evacuation of CNG in case of emergency. 

MOMENTUM FUEL TECHNOLOGIES LAUNCHES CNG FUEL MANAGEMENT MODULE DROP-IN REPLACEMENT

Momentum Fuel Technologies is now offering a Fuel Management Module (FMM) Drop-In Replacement for many FMMs on the market.  

Momentum’s FMM, which houses the electronics, fuel filter and fuel-fill receptacles, features custom bolt-on brackets to match most existing bolt holes.  “Our product was designed to easily integrate with systems as a direct replacement for other, less efficient FMMs on the market for heavy- and medium-duty vehicles,” said Mike Zimmerman, General Manager, Momentum Fuel Technologies.  “This drop-in option is valuable to customers who need to replace their previous FMM and want a new system which was designed with performance, serviceability and durability in mind,” he added. 

Momentum’s new FMM is also able to integrate with the vehicle’s J1939 communication network, providing improvements to engine and fuel system diagnostics, as well as improved driver feedback.  The available in-dash digital gauge provides highly-accurate fuel readings, reduces range anxiety and provides accurate distance-to-empty information to drivers.

The new system focuses on fuel efficiency with a Parker HP Regulator with integrated coalescing filter, which allow trucks to operate at a lower fuel pressure and use more of the fuel in their system.  It also includes a manifold base design and NGV1 and HD fast-fill receptacles and is equipped with a highly-durable piston-style single-stage regulator, integrated heat exchanger and proprietary poppet technology.  It is optimized to operate in extreme environmental conditions while maintaining high flow across the full operating range of CNG vehicles. 

For enhanced driver and technician safety, the system is easy to monitor and service.  High-pressure and low-pressure gauges are easy to see, with pressure lines colored for easy identification.  With sturdy but weight-conscious construction, Momentum’s FMM has a multiple-step coating process to prevent corrosion.  To further assist fleet managers, Momentum’s FMM works in conjunction with Rush Truck Centers’ telematics platform to monitor usage and fuel consumption. 


Momentum Fuel Technologies made several major announcements this week at Waste Expo 2017. The company has added a 115 diesel gallon equivalent (DGE) tailgate system to its lineup of compressed natural gas (CNG) fuel system solutions for Class 6 to Class 8 trucks, with the largest fuel capacity available on the market, as well as a new Fuel Management Module (FMM) Drop-In Replacement, and the availability of live CNG vehicle data and fuel usage reports through a partnership with Geotab.  

Momentum’s tailgate system was designed for E-Z Pack, who had previously used five- and six-tank tailgate systems on its refuse bodies. “We set out to design a system for E-Z Pack that could contain the same or increased fuel capacity as their old system but with reduced weight, to keep costs in check,” said Zimmerman. “We were able to increase capacity from 105DGE to 115DGE using only three tanks, and this system is 400 pounds lighter than E-Z Pack’s previous system,” Zimmerman added. The system is designed to be scalable, with a smaller, two-tank 75DGE system available as well.

“We are pleased to add to our product line another great CNG solution to meet the unique and varied needs of the refuse industry,” said Mike Zimmerman, General Manager, Momentum Fuel Technologies.  “We are committed to supporting  the refuse industry with a complete offering of CNG options for all refuse applications.” Zimmerman added. 

With safety and convenience in mind, the system features a visible pressure gauge so drivers and technicians can see the pressure in the tank from ground level. The system’s tanks are at least seven feet off the ground with a steel guard structure around the base, designed to be safer in the event of a rear impact.  Further, the tailgate system keeps a lower profile than other CNG configurations, for enhanced safety of refuse vehicles.

All E-Z Pack units include a vertical fuel management module (FMM), which houses the electronics, fuel filter and fuel-fill receptacles and works in conjunction with the Rush Truck Centers’ telematics platform, allowing fleet managers to monitor usage and manage fuel consumption.  The vertical FMM is narrower than the version used in other Momentum configurations, taking up less valuable space on smaller truck bodies.

All Momentum products feature a fuel pressure regulator with a high-capacity filter manufactured by Parker.  This allows the system to operate from 3600 pounds per square inch (PSI) when full to a minimum of 230 PSI, so drivers can go even further on a tank of fuel.  The pressure regulator is designed to reduce leak points and weight, and the high-capacity filter is larger and designed to be serviced less frequently than competitive products.

Momentum Fuel Technologies offers the industry’s first complete CNG fuel system solution for Class 6 to Class 8 trucks, with support from design and manufacturing, to sales and ongoing service throughout the product life cycle.  The approach for this product line is based on innovative design, advanced safety features, installation expertise and the industry’s most comprehensive support network.

Momentum’s expansive product line includes six back-of-cab configurations (70DGE, 75DGE, 87DGE, 115DGE, 150DGE and 175DGE), three side-mount configurations (30DGE, 40DGE and 45DGE) and various roof-mount configurations that integrate with multiple body OEMs. The pressure regulator with high-capacity filter comes standard on all Momentum products.  New and replacement parts for this system are manufactured in-house by Momentum Fuel Technologies, ensuring quality and improving speed to customers.  With safety in mind, all high-pressure fuel lines in Momentum systems are painted yellow, for easier identification by technicians.  Momentum products feature an enhanced pressure relief device (PRD) system with eight fast flow PRDs to allow rapid evacuation of CNG in case of emergency. 

MOMENTUM FUEL TECHNOLOGIES LAUNCHES CNG FUEL MANAGEMENT MODULE DROP-IN REPLACEMENT

Momentum Fuel Technologies is now offering a Fuel Management Module (FMM) Drop-In Replacement for many FMMs on the market.  

Momentum’s FMM, which houses the electronics, fuel filter and fuel-fill receptacles, features custom bolt-on brackets to match most existing bolt holes.  “Our product was designed to easily integrate with systems as a direct replacement for other, less efficient FMMs on the market for heavy- and medium-duty vehicles,” said Mike Zimmerman, General Manager, Momentum Fuel Technologies.  “This drop-in option is valuable to customers who need to replace their previous FMM and want a new system which was designed with performance, serviceability and durability in mind,” he added. 

Momentum’s new FMM is also able to integrate with the vehicle’s J1939 communication network, providing improvements to engine and fuel system diagnostics, as well as improved driver feedback.  The available in-dash digital gauge provides highly-accurate fuel readings, reduces range anxiety and provides accurate distance-to-empty information to drivers.

The new system focuses on fuel efficiency with a Parker HP Regulator with integrated coalescing filter, which allow trucks to operate at a lower fuel pressure and use more of the fuel in their system.  It also includes a manifold base design and NGV1 and HD fast-fill receptacles and is equipped with a highly-durable piston-style single-stage regulator, integrated heat exchanger and proprietary poppet technology.  It is optimized to operate in extreme environmental conditions while maintaining high flow across the full operating range of CNG vehicles. 

For enhanced driver and technician safety, the system is easy to monitor and service.  High-pressure and low-pressure gauges are easy to see, with pressure lines colored for easy identification.  With sturdy but weight-conscious construction, Momentum’s FMM has a multiple-step coating process to prevent corrosion.  To further assist fleet managers, Momentum’s FMM works in conjunction with Rush Truck Centers’ telematics platform to monitor usage and fuel consumption. 


Fuel management module

Momentum Fuel Technologies made several major announcements this week at Waste Expo 2017. The company has added a 115 diesel gallon equivalent (DGE) tailgate system to its lineup of compressed natural gas (CNG) fuel system solutions for Class 6 to Class 8 trucks, with the largest fuel capacity available on the market, as well as a new Fuel Management Module (FMM) Drop-In Replacement, and the availability of live CNG vehicle data and fuel usage reports through a partnership with Geotab.  

Momentum’s tailgate system was designed for E-Z Pack, who had previously used five- and six-tank tailgate systems on its refuse bodies. “We set out to design a system for E-Z Pack that could contain the same or increased fuel capacity as their old system but with reduced weight, to keep costs in check,” said Zimmerman. “We were able to increase capacity from 105DGE to 115DGE using only three tanks, and this system is 400 pounds lighter than E-Z Pack’s previous system,” Zimmerman added. The system is designed to be scalable, with a smaller, two-tank 75DGE system available as well.

“We are pleased to add to our product line another great CNG solution to meet the unique and varied needs of the refuse industry,” said Mike Zimmerman, General Manager, Momentum Fuel Technologies.  “We are committed to supporting  the refuse industry with a complete offering of CNG options for all refuse applications.” Zimmerman added. 

With safety and convenience in mind, the system features a visible pressure gauge so drivers and technicians can see the pressure in the tank from ground level. The system’s tanks are at least seven feet off the ground with a steel guard structure around the base, designed to be safer in the event of a rear impact.  Further, the tailgate system keeps a lower profile than other CNG configurations, for enhanced safety of refuse vehicles.

All E-Z Pack units include a vertical fuel management module (FMM), which houses the electronics, fuel filter and fuel-fill receptacles and works in conjunction with the Rush Truck Centers’ telematics platform, allowing fleet managers to monitor usage and manage fuel consumption.  The vertical FMM is narrower than the version used in other Momentum configurations, taking up less valuable space on smaller truck bodies.

All Momentum products feature a fuel pressure regulator with a high-capacity filter manufactured by Parker.  This allows the system to operate from 3600 pounds per square inch (PSI) when full to a minimum of 230 PSI, so drivers can go even further on a tank of fuel.  The pressure regulator is designed to reduce leak points and weight, and the high-capacity filter is larger and designed to be serviced less frequently than competitive products.

Momentum Fuel Technologies offers the industry’s first complete CNG fuel system solution for Class 6 to Class 8 trucks, with support from design and manufacturing, to sales and ongoing service throughout the product life cycle.  The approach for this product line is based on innovative design, advanced safety features, installation expertise and the industry’s most comprehensive support network.

Momentum’s expansive product line includes six back-of-cab configurations (70DGE, 75DGE, 87DGE, 115DGE, 150DGE and 175DGE), three side-mount configurations (30DGE, 40DGE and 45DGE) and various roof-mount configurations that integrate with multiple body OEMs. The pressure regulator with high-capacity filter comes standard on all Momentum products.  New and replacement parts for this system are manufactured in-house by Momentum Fuel Technologies, ensuring quality and improving speed to customers.  With safety in mind, all high-pressure fuel lines in Momentum systems are painted yellow, for easier identification by technicians.  Momentum products feature an enhanced pressure relief device (PRD) system with eight fast flow PRDs to allow rapid evacuation of CNG in case of emergency. 

MOMENTUM FUEL TECHNOLOGIES LAUNCHES CNG FUEL MANAGEMENT MODULE DROP-IN REPLACEMENT

Momentum Fuel Technologies is now offering a Fuel Management Module (FMM) Drop-In Replacement for many FMMs on the market.  

Momentum’s FMM, which houses the electronics, fuel filter and fuel-fill receptacles, features custom bolt-on brackets to match most existing bolt holes.  “Our product was designed to easily integrate with systems as a direct replacement for other, less efficient FMMs on the market for heavy- and medium-duty vehicles,” said Mike Zimmerman, General Manager, Momentum Fuel Technologies.  “This drop-in option is valuable to customers who need to replace their previous FMM and want a new system which was designed with performance, serviceability and durability in mind,” he added. 

Momentum’s new FMM is also able to integrate with the vehicle’s J1939 communication network, providing improvements to engine and fuel system diagnostics, as well as improved driver feedback.  The available in-dash digital gauge provides highly-accurate fuel readings, reduces range anxiety and provides accurate distance-to-empty information to drivers.

The new system focuses on fuel efficiency with a Parker HP Regulator with integrated coalescing filter, which allow trucks to operate at a lower fuel pressure and use more of the fuel in their system.  It also includes a manifold base design and NGV1 and HD fast-fill receptacles and is equipped with a highly-durable piston-style single-stage regulator, integrated heat exchanger and proprietary poppet technology.  It is optimized to operate in extreme environmental conditions while maintaining high flow across the full operating range of CNG vehicles. 

For enhanced driver and technician safety, the system is easy to monitor and service.  High-pressure and low-pressure gauges are easy to see, with pressure lines colored for easy identification.  With sturdy but weight-conscious construction, Momentum’s FMM has a multiple-step coating process to prevent corrosion.  To further assist fleet managers, Momentum’s FMM works in conjunction with Rush Truck Centers’ telematics platform to monitor usage and fuel consumption. 


Company info

1051 Republic Drive, Suite 200
Roanoke, TX
US, 76262

Website:
momentumfueltechnologies.com

Read more