Recycling Product News Logo

ISL G MidRange natural gas engine to reduce NOx emissions by 90%

Cummins Westport Near Zero NOx Natural Gas Engine first Certified to California Emissions Standards

Cummins Westport Inc. has announced the new ISL G Near Zero (NZ) NOx natural gas engine as the first MidRange engine in North America to receive emission certifications from both U.S. Environmental Protection Agency (EPA) and Air Resources Board (ARB) in California that meet the 0.02 g/bhp-hr optional Near Zero NOx Emissions standards for medium-duty truck, urban bus, school bus and refuse/recycle applications.

Cummins Westport says their ISL G NZ exhaust emissions will be 90% lower than the current EPA NOx limit of 0.2 g/bhp-hr and also meet the 2017 EPA greenhouse gas emission requirements. CWI natural gas engines have met the 2010 EPA standard for particulate matter (0.01 g/bhp-hr) since 2001.

Since it was first introduced in 2007, the ISL G 8.9 liter engine has become the leading natural gas engine for transit buses, refuse trucks and urban delivery trucks, which represent a significant portion of on-highway and urban power in California. ISL G NZ meets the ARB certification 8 years in advance of the 2023 California Near Zero NOx schedule contributing to California Clean Air initiatives. ARB has defined this certified Near Zero emission level as equivalent to a 100% battery truck using electricity from a modern combined cycle natural gas power plant.

"These North America emission certifications result in a game-changing reduction in urban tailpipe and engine related emissions. This, combined with the reliability and operating improvements on the base ISL G engine, puts CWI natural gas engines at the forefront of cost-effective and dependable emission reduction strategies in transit, medium-duty truck and refuse applications," said Rob Neitzke, President of Cummins Westport Inc.

Over 40,000 natural gas powered trucks and buses operate in North America and the new ISL G NZ will power Near Zero emission trucks and buses at a significant discount to the cost of electric powered vehicles. In addition to the dramatic 90% reduction in NOx, the ISL G NZ will feature Closed Crankcase Ventilation (CCV) reducing engine related methane emissions by 70%.

The ISL G NZ will continue to offer customers the benefit of performance with the lowest emissions utilizing maintenance-free Three Way Catalyst (TWC) aftertreatment. TWCs are effective, simple, passive devices, packaged as part of the muffler.

Cummins Westport natural gas engines do not require active aftertreatment such as a Diesel Particulate Filter (DPF) or Selective Catalytic Reduction (SCR).

CWI would like to acknowledge engine development funding support from South Coast Air Quality Management District (SCAQMD), SoCalGas and California Energy Commission (CEC).

"In Southern California, clean, zero- and near-zero emission vehicle technologies are critical to meeting clean air standards," said Barry Wallerstein, executive officer for the South Coast Air Quality Management District. "Cummins Westport's new engine provides an important tool toward reaching that goal."

"SoCalGas is pleased to be part of what began as collaborative research to advance our common goal to reduce emissions and improve air quality. We congratulate CWI on developing this game-changing natural gas engine technology to harness the potential of abundant, low-cost natural gas for transportation applications," said Dennis Arriola, president and CEO of SoCalGas.

"Advancing clean energy technologies is a critical component of California's strategy to address local air quality issues and climate change," said California Energy Commission Chair Robert B. Weisenmiller. "The development of this natural gas engine is a testament to California's innovative culture, fostered by active collaboration and partnership."

Production of the ISL G NZ is expected to begin in April 2016 and the engine will be made available as a first fit engine with transit and refuse OEMs, and as an engine replacement for existing ISL G vehicles, resulting in an immediate NOx emission reduction well before the 2023 Near Zero NOx goals set in California.

Performance and efficiency will match the current ISL G, with engine ratings from 250-320 horsepower, and 660-1,000 lb-ft torque available. Base warranty, extended coverage options, maintenance procedures and service intervals are also the same as the current ISL G.

CWI proprietary Stoichiometric EGR Spark Ignited (SESI) natural gas engine technology with TWC as released on the ISL G NZ is also applicable to CWI ISB6.7 G and ISX12 G engines, with Near Zero product plans for these engines being assessed. 

Company info

101 – 1750 West 75th Avenue
Vancouver, BC
CA, V6P 6G2

Website:
cumminswestport.com

Read more

More from Collection & Hauling

Sponsored Brought to you by: Machinex Logo

Discover the main features of a reliable & efficient baler

Single-Ram and II-Ram High-Capacity Balers

At Machinex, we've been designing sorting systems for over 35 years, so we know how essential it is for MRF operators to have a baler they can trust and not worry about its operational reliability. This is why we design and manufacture reliable single-ram and II-ram high-capacity balers to specifically help optimize their operations.

 Watch the video of our expert who presents the main features of Machinex balers delivering these important benefits:

  • Easy & accessible maintenance
  • Reduced maintenance & bale handling costs
  • Energy savings
  • Optimal bale density
Learn more
Sponsored Brought to you by: Komptech Americas LLC. Logo

How to streamline C&D waste processing to increase profitability

For C&D recyclers, waste haulers, demolition contractors and landfills, there is a growing opportunity to profit from rethinking processes. Although every operation is different, by streamlining the front end of the C&D operation processes with purpose-built technologies, recyclers can tap into new end markets, accommodate higher material volumes, stay ahead of regulatory restrictions, increase recovery rates and add commodity revenue, while decreasing labor and other costs.

Download the new eBook to learn about:

  • Finding opportunities in the alternative to landfilling C&D
  • How facilities can increase their profits from C&D
  • Using the right C&D processing technology in the right locations
Learn more

Get our newsletter

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Get our newsletter

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more