The ST51 Air/Gas Flow Meter supports the US EPA’s BACT (Best Available Control Technology) practices, which require technologies that achieve the maximum degree of emissions control that can be achieved by a particular facility and is based on a case-by-case decision that takes into account technical feasibility, cost and other energy, environmental and economic impacts. FCI designed the ST51 Flow Meter to measure and monitor GHG per the EPA’s requirements. It features a thermal mass, insertion-style flow element with flow accuracy to ±1% of reading over a broad flow range from 0.3 to 400 SFPS (0.08 to 122 MPS), and repeatability of ±0.5 percent of reading. The flow element is available for use in line sizes from 2 to 24 inches (51 to 610 mm). It operates over a wide turndown range of 100:1 and at temperatures from 0 to 250°F (-18 to 121°C). It withstands pressures up to 500 psig [34 bar (g)].
The ST51 Flow Meter’s robust thermal mass flow sensing element has no moving parts and no orifices to clog or foul to attain virtually maintenance-free service in wet, dirty biogas applications. The flow element is constructed with a 316L stainless steel body and Hastelloy C-22 thermowell sensors to resist corrosion. It includes built-in temperature compensation circuitry for accurate, repeatable measurement year-round as temperatures rise and fall seasonally.
The ST51 flow meter is rich with outputs for user interfaces and information. Dual 4-20mA analog outputs are user assignable to flow rate and/or temperature, and there is a 0-1kHz pulse output for totalized flow. The transmitter’s digital communications include an RS-232C port, and with units that have the digital display option there is a wireless IR link for PDA use.
