The DH 608 wood chipper will process trunk diameters of up to 23.6 inches of soft wood and up to 18.9 inches of hard wood. The machine is mounted on a double central axle trailer chassis, with a revolving superstructure supported by a slewing ring, and a wing angle that amounts to 270 degrees. The DH 608 is powered with a low-consumption Mercedes OM 460LA six-cylinder engine and 490 hp, and features a load-depending feed system consisting of chain floor and in-feed roller.
The production capacity of the DH 608 is approximately 130 to 200 cubic yards and high quality chips can be adjusted in size with interchangeable screening segments.
The production capacity of the DH 608 is approximately 130 to 200 cubic yards and high quality chips can be adjusted in size with interchangeable screening segments.
