High-powered breaker with extra long stroke design
The BXR150 hydraulic breaker, at 15,000 ft-lbs, is designed for rugged, continuous duty in demanding breaking applications. It offers an extra long stroke design which improves the power-to-weight ratio, providing the widest carrier range (120,000 to 220,000 pounds) and power available. Precise tolerances between the piston and cylinder provide high efficiency, blow rate and power, and large cross-section upper and lower shock absorbing isolators reduce vibration feedback to the carrier. BTI’s exclusive front head restraint system tightly guides the front head within the housing, reducing loading to the tie rods and the upper portion of the breaker, and a narrow box housing design is well suited to tight trenching conditions.
Working weight of the BXR150 is 12,000 pounds (may vary depending on bracket), tool diameter is eight inches, and flow range is 85 to 120 gpm. Additionally, operating pressure is 2,030 to 2,755 psi, and frequency range is 260 to 425 bpm in long stroke mode (high impact) and 340 to 530 in short stroke mode (high frequency), which is manually controlled via hydraulic piloted stroke control.
Working weight of the BXR150 is 12,000 pounds (may vary depending on bracket), tool diameter is eight inches, and flow range is 85 to 120 gpm. Additionally, operating pressure is 2,030 to 2,755 psi, and frequency range is 260 to 425 bpm in long stroke mode (high impact) and 340 to 530 in short stroke mode (high frequency), which is manually controlled via hydraulic piloted stroke control.
