As standard features, Overbuilt car crushers include a diesel engine with Murphy safety shutdown gauges, electronic idle-up, and a cold weather package including head-bolt heater, heavy-duty air cleaner and heavy-duty radiator. Units have a ten-foot-high crusher opening when raised, a crusher opening width of seven feet six inches and length of 20 feet one inch. Hydraulic cylinder pressure is up to 2,500 psi and crushing force is up to 159 tons. Other standard features include: an advanced oil recovery system with dual sludge traps, a water separating valve and a 400-gallon “on-board” waste oil storage tank; remote control with two automatic crushing cycles, individual up and down cylinder control switches, and emergency stop; safety locks that can be placed to prevent the deck from falling; a lockable cabinet for valves and engine controls which provides additional storage; and magnetic marker lights next to the crushing chamber that can be easily moved or removed while crushing.
Options include a high-speed oil bypass system, hydraulic landing gear with large pads, an air compressor complete with a 120-gallon reservoir, filter, regulator, automatic oiler, 100 feet of half-inch hose on a spring retractable reel, an auxiliary fuel pump, and a nine-foot one-inch opening/close unit.
Options include a high-speed oil bypass system, hydraulic landing gear with large pads, an air compressor complete with a 120-gallon reservoir, filter, regulator, automatic oiler, 100 feet of half-inch hose on a spring retractable reel, an auxiliary fuel pump, and a nine-foot one-inch opening/close unit.
