Bayne Premium Lift Systems

910 Fork Shoals Road
Greenville, SC
US, 29605

Related News

Tags
Industry News

Bayne Manufacturing moves operations

At the end of 2014, Bayne Premium Lift Systems, a division of Environmental Solutions Group (ESG), moved their manufacturing operations from Greenville, SC to the new ESG facility in Phoenix, AZ. The Bayne mobile refuse lifter product line is now being manufactured in Phoenix and the commercial and industrial lifter product line will be produced in Vernon, AL.

Read More

Revolution lifter adjusts for uneven terrain

Revolution lifter adjusts for uneven terrain

The Revolution is an advanced, modern cart lifter using a patented design that incorporates a sweeping action that automatically adjusts for uneven terrain, reducing the need for operators to lift carts onto the lift plate.

Read More

Revolution cart lifter

The Revolution cart lifter features a new patent-pending cart tipper design that provides users with 21 inches of ground clearance, along with the smooth operation of the patented Thinline rack and pinion rotary actuation system. The Revolution is compatible with domestic style 2-bar roll-out carts and with a kick bar. Plus, its sweeping motion provides for a greater cart pick-up envelope, and units will dump carts higher and deeper into a rear-load hopper.

Read More

New lifter marks next chapter for Bayne

The Revolution cart lifter is the latest from Bayne and features a new patent-pending cart tipper design that provides users with unprecedented versatility in daily refuse and recycling collection operations.

Read More

Material handling lifts

Bayne Premium Lift Systems introduces its C/I Taskmaster series of lifters for a wide variety of material handling applications, including waste disposal. Using a C/I Taskmaster lifter, an employee needs only to wheel the container to the lifter and press the “up” button. The lifter then automatically secures the cart to the lift plate, picks it up and dumps it. With a press of the “down” button, the cart is automatically returned to the ground. C/I Taskmaster lifters can be equipped with casters for mobile use, be mounted to loading docks to enable easy dumping into roll-off refuse containers or be mounted directly onto trash balers or compactors.

Read More

Tags
Solid Waste

C/I Taskmaster cart lifters

C/I Taskmaster cart lifters

The new C/I Taskmaster series of lifters are compatible with standard two-bar carts and tilt trucks equipped with lifting bars. Using up and down buttons, these lifters automatically secure carts to the lift plate, pick up, dump, and then return carts to the ground. C/I Taskmaster lifters can be equipped with casters for mobile use, mounted to loading docks or directly onto trash balers or compactors. Lifting capacities of 550, 750 and 1,000 pounds are offered, with cycle times of eight to 10 seconds.

Read More

Hydraulic cart tipper

Hydraulic cart tipper

The ETL 208 series of hydraulic cart tippers from Bayne Premium Lift Systems provide 50 percent more ground clearance than similar models. As a result, they are less susceptible to damage when mounted on rear loaders being driven over uneven roads or on waste and recycling sites. ETL 208 lifters pick up both sizes of European-style carts, and was designed so that the cart-support arm tucks up com- pactly at idle, positioning the lifter more than 20 inches above the ground. Lift capacity is 375 pounds and cycle time is eight to 10 seconds.

Read More

Hydraulic cart tipper

Hydraulic cart tipper

The new ETL 208 series of hydraulic cart tippers from Bayne Premium Lift Systems provide 50 percent more ground clearance than similar models. As a result, they are less susceptible to damage when mounted on rear loaders being driven over uneven roads or at the landfill. ETL 208 lifters pick up both sizes of European-style carts, and was designed so that the cart-support arm tucks up compactly at idle, positioning the lifter more than 20 inches above the ground. Lift capacity is 375 pounds and cycle time is eight to 10 seconds.

Read More

Updated cylinder lifts

Updated cylinder lifts

These updated BTL and MBTL Series cart lifters feature design changes on the lifters’ slider latches, the part of the lifter that moves up and down to grab and release the cart. The changes apply to all Bayne BTL and MBTL Series of lifters, except the BTL 208 RHK Series, which uses a rotating hook instead of a slider latch to secure the container to the lifter.

Read More

Updated cylinder lift

Updated cylinder lift

The Taskmaster cylinder lift has been updated. Units now offer extended service life and reduced maintenance costs. Changes include a new adjustable hook, solid cylinder connector, single faceplate pin, various bushing improvements and an upgrade to the breakaway bolt and faceplate stop. The Taskmaster was designed for refuse and recycling haulers looking for an economical, high-quality cart lifter. It can be mounted on collection vehicles or on stationary frames or compactors for use in a variety of material handling applications.

Read More