Diamond Z Manufacturing

11299 Bass Lane
Caldwell, ID
US, 83605

Related Products

Related News

Tags
Organics Recycling

Diamond Z DZH3000

DiamondZ DZH3000

Diamond Z and Rule Steel have announced the unveiling of their newest horizontal grinder. Continuing Diamond Z’s tradition of industry innovation and excellence, this machine is ready to make an impact on the industrial grinding world.

Read More

Car crushers

DZCC800 Series Car Crushers are designed for quality, durability, productivity and serviceability. Hardened steel wear areas maximize the strength and stability of the crushing chamber, and units are equipped with an automated crush and rock cycle that maximizes productivity and offers very high levels of compaction. A stationary, electric model is also available.

Read More

DZH6000 horizontal grinder

The DZH6000 model horizontal grinder features quick screen changes of 20 minutes or less, horsepower options up to 1,050, low-maintenance, and production capabilities up to 749 cubic yards per hour. Units are powered by a Caterpillar C27 ACERT EPA Tier II rated engine, and feature a four-ton hammermill and a screen area of 4,320 total square inches.

Read More

DZH6000 model horizontal grinder

The DZH6000 model horizontal grinder features quick screen changes of 20 minutes or less, up to 1,050 horsepower options, low-maintenance and production capabilities of up to 749 cubic yards per hour. Units are powered by a Caterpillar C27 ACERT EPA tier II rated engine, and the drive system uses a fluid coupling – an extremely efficient hydraulic unit which replaces the entire clutch assembly, reducing shock loads that can tear apart some machines. The DZH6000 also features a four-ton hammermill and a screen area of 4,320 total square inches.

Read More

New line of industrial recycling equipment

Diamond Z Manufacturing recently announced a new line of industrial equipment, consisting of mobile and stationary car crushers, and baler loggers in either one or two ram cylinder configurations. The model DZBL650-LS700 (shown here) is a single ram cylinder baler/logger/ loader/shear with a total cycle time of less than two minutes. These units feature a baling chamber that is 108 inches by 20 feet open, and 24 inches by 32 inches closed, for maximum productivity. The DZBL650-LS700 comes with bolt-in replaceable 3/4-inch T-1 liners to extend the life of the crush chamber, has a state of the art multi-layer touch screen control system with operational diagnostic, value and fault code screens, and features a heated, air conditioned cab with joystick controls and a deluxe seat for operator comfort. Units also come with automated control cycles for the baler, logger and the shear, as well as a password-protected diagnostic screen with auto system analysis. The shear is a 700 ton unit with an opening of 25 by 33 inches, and will make approximately six cuts per minute, giving the operator the ability to log material and shear logs to any desired length. These new baler logger loader shears are available in a single ram or dual ram design, and in stationary or portable, diesel or electric configurations. Options include self-loaders, machine-mounted shears up to 700 tons, an air compressor for maintenance and convenience, a pre-load table for efficiency, and an auxiliary fuel tank with pump to assist with support equipment.

Read More

Tags
Organics Recycling

Track mounted grinder

Track mounted grinder

Powered by a CAT C32 1,200-hp engine with AC-ERT Technology, the track mounted DZH 7000TKT is a portable, high-capacity, low-maintenance horizontal grinder designed specifically for large-scale wood waste operations. The DZH 7000TKT will process more than 1,000 cubic yards of material per hour, and primary machine features consist of the patented feed roller design that rises past centre to safety lock position for easy maintenance, and screen replacement time of less than 20 minutes.

Read More

Track grinder features 1,200 hp

Track grinder features 1,200 hp

Powered by a Cat C32, 1,200-hp engine with ACERT Technology, the track- mounted DZH 7000TKT is a portable, high-capacity, low-maintenance horizontal grinder designed specifically for large-scale wood-waste operations. The DZH7000TKT will process more than 1,000 cubic yards of material per hour, and primary machine features consist of the patented feed roller design that rises past centre to a safety lock position for easy maintenance, and screen replacement of less than 20 minutes. Some other key features include: a variable speed dual drive feed chain; a patented Hydraulic Rod Puller for quick hammer change; and 30 hammers at 140 pounds each.

Read More

Powerful track mounted horizontal grinder “biggest on market”

Powerful track mounted horizontal grinder “biggest on market”

Powered by a Cat C32, 1,200 hp engine with ACERT Technology, the track mounted DZH 7000TKT is the largest unit of its kind in the industry, according to the company. Units are a portable, high-capacity, low-maintenance horizontal grinder designed specifically for large-scale wood waste operations. The DZH 7000TKT will process more than 1,000 cubic yards of material per hour, and primary machine features consist of the patented feed roller design that rises past centre to safety lock position for easy maintenance, and screen replacement of less than 20 minutes. An aggressive variable speed dual drive feed chain for handling the toughest material is also standard, as is the industry’s first patented Hydraulic Rod Puller for quick hammer change. Integral standard features also include 30 hammers at 140 pounds each, a Fluid Coupling soft start drive system, self-diagnostic radio remote control, and a 545-gallon fuel capacity. The DZH7000TKT series has its own transport system to easily move the grinder from jobsite to job site.Correction note:In the April issue of Recycling Product News, we ran Diamond Z’s model DZH 7000 and incorrectly specified that the unit is available with “engine horsepower options up to 1,000 hp.” In fact, Diamond Z recently upgraded the horsepower on the DZH 7000 horizontal grinder, which is available with a Cat C32 1,200 hp engine with ACERT Technology. The DZH 7000 Series is a portable, high-capacity, low-maintenance horizontal grinder designed for precision grinding of any material including wood debris, brush, limbs, logs, stumps, and construction materials.

Read More

DZH 7000 model blends technologies from existing grinder line

DZH 7000 model blends technologies from existing grinder line

Designed in response to growing demand for horizontal grinding, Diamond Z Manufacturing has blended technologies from its existing industrial grinder product line to launch an innovative horizontal machine design that caters to large-scale wood waste processing applications in both production and ease of accessibility. The DZH 7000 Series is a portable, high-capacity, low-maintenance horizontal grinder designed for precision grinding of any material including wood debris, brush, limbs, logs, stumps, and construction materials.

Read More