Diamond Z

Diamond Z's high-capacity, low maintenance DZH 7000 Series horizontal grinder is designed for any large-scale wood waste and land clearing grinding operation. The latest models are equipped with an internal drive feed roller which allows for less moving parts, quick and easy screen change and maintenance access, very aggressive feed and one of the largest crush roller and hammer mills in the industry. With 1,200 horsepower and proven production capacities in excess of 1,000 yards per hour, Diamond Z's DZH 7000 Series is ideal for the most difficult jobs. No other horizontal grinder can imitate this machines compliment of power, unparalleled production capabilities, versatility in difficult environments, innovation, and the attention to detail that stands out in every DZH 7000. 

Read More

The latest DZCC800 Series Car Crusher is designed with the same quality, durability, productivity and serviceability that Diamond Z is known for, with wood waste grinders, according to the Idaho-based manufacturer.

Read More

Multiple major manufacturers of horizontal grinders have released new models in 2018. HOGS, as they are sometimes called (HOrizontal GrinderS), are unquestionably the workhorse of the wood recycling industry and are a key piece of equipment for composters, land clearing contractors and biomass-for-energy producers, as well as C&D and MSW processors, where in both cases, wood and other organics are part of a mixed stream of materials. The latest model horizontal grinders feature lighter weights with higher production, increased transportability and site mobility, diesel, hybrid and fully electric power options, along with sophisticated controls systems, and ease of use and maintenance for operators and owners. This article looks at the latest horizontal grinder models and updates from Morbark, CW Mill, Rotochopper, CBI, Diamond Z, Bandit, Vermeer, Precision Husky, and Peterson Pacific.

Read More

Diamond Z and Rule Steel have announced the unveiling of their newest horizontal grinder. Continuing Diamond Z’s tradition of industry innovation and excellence, this machine is ready to make an impact on the industrial grinding world.

Read More

Diamond Z’s latest model is the DZH 7000E electric-powered horizontal wood grinder. These units are an alternative to diesel-powered machines and will increase the production output of wood material, with production rates up to 700 cubic yards per hour for green waste. 

Read More

DZCC800 Series Car Crushers are designed for quality, durability, productivity and serviceability. Hardened steel wear areas maximize the strength and stability of the crushing chamber, and units are equipped with an automated crush and rock cycle that maximizes productivity and offers very high levels of compaction. A stationary, electric model is also available.

Read More

The DZH6000 model horizontal grinder features quick screen changes of 20 minutes or less, horsepower options up to 1,050, low-maintenance, and production capabilities up to 749 cubic yards per hour. Units are powered by a Caterpillar C27 ACERT EPA Tier II rated engine, and feature a four-ton hammermill and a screen area of 4,320 total square inches.

Read More

The DZH6000 model horizontal grinder features quick screen changes of 20 minutes or less, up to 1,050 horsepower options, low-maintenance and production capabilities of up to 749 cubic yards per hour. Units are powered by a Caterpillar C27 ACERT EPA tier II rated engine, and the drive system uses a fluid coupling – an extremely efficient hydraulic unit which replaces the entire clutch assembly, reducing shock loads that can tear apart some machines. The DZH6000 also features a four-ton hammermill and a screen area of 4,320 total square inches.

Read More

Diamond Z Manufacturing recently announced a new line of industrial equipment, consisting of mobile and stationary car crushers, and baler loggers in either one or two ram cylinder configurations. The model DZBL650-LS700 (shown here) is a single ram cylinder baler/logger/ loader/shear with a total cycle time of less than two minutes. These units feature a baling chamber that is 108 inches by 20 feet open, and 24 inches by 32 inches closed, for maximum productivity. The DZBL650-LS700 comes with bolt-in replaceable 3/4-inch T-1 liners to extend the life of the crush chamber, has a state of the art multi-layer touch screen control system with operational diagnostic, value and fault code screens, and features a heated, air conditioned cab with joystick controls and a deluxe seat for operator comfort. Units also come with automated control cycles for the baler, logger and the shear, as well as a password-protected diagnostic screen with auto system analysis. The shear is a 700 ton unit with an opening of 25 by 33 inches, and will make approximately six cuts per minute, giving the operator the ability to log material and shear logs to any desired length. These new baler logger loader shears are available in a single ram or dual ram design, and in stationary or portable, diesel or electric configurations. Options include self-loaders, machine-mounted shears up to 700 tons, an air compressor for maintenance and convenience, a pre-load table for efficiency, and an auxiliary fuel tank with pump to assist with support equipment.

Read More

Powered by a CAT C32 1,200-hp engine with AC-ERT Technology, the track mounted DZH 7000TKT is a portable, high-capacity, low-maintenance horizontal grinder designed specifically for large-scale wood waste operations. The DZH 7000TKT will process more than 1,000 cubic yards of material per hour, and primary machine features consist of the patented feed roller design that rises past centre to safety lock position for easy maintenance, and screen replacement time of less than 20 minutes.

Read More