Orwak recently launched their 3105 and 3110 frontal balers, the company’s most compact units. These new balers feature low height in combination with a small footprint, for placement in nearly any location. Units are flexible and are perfect for customers with small volumes of packaging waste. The Orwak 3105 and 3110 share the same features, but the 3105 generates more light-weight bales. Volume reduction is between 5:1 and 7:1, and the new models are equipped with a material selector for paper and plastic, which makes it easy to change the setting between high pressure and low pressure For best results when handling plastic foil, for example, which contains a lot of air, it should be compacted more slowly and with a lower press force than cardboard. When selecting “the plastic mode” on the Orwak 3110, the press force is reduced from four to three tons, and on the 3105, the press force stays the same, but the press cycle is slightly longer. Both models offer adjustable bale length in three different sizes for more flexible waste management, and bales can be easily handled with a bale trolley.
|Address||Box 58, Sävsjö, 576 22, SE|
|Phone||+46 (0)382-157 00|
|Fax||+46 (0)382-106 07|
Due to recently developed silent hydraulics, Orwak has recently introduced “the silent family” line of balers with extremely low noise levels. According to their manufacturer, these quiet-running machines promote users’ ability to concentrate and facilitate oral communication, which contributes to improving the work environment.
The Orwak 3210 is designed as a small and efficient front-loaded baler with a 13 second cycle time and capacity up to 80 kg for cardboard and 100 kg for plastic. Units will handle shrink-wrap, shredded paper, paper bags and sacks, plastic bags, both plastic and steel strapping, as well as food and paint cans. Press force is 12 tons, and units produce bale weights from 176 pounds for cardboard, up to 220 pounds for shrink-wrap and plastic.
Three new vertical baler models have been introduced by Orwak: the 3210, 3410 and 3810. The Orwak 3210 (shown) is designed as a small and efficient front-loaded baler with a 13 second cycle time and capacity up to 80 kg for cardboard and 100 kg for plastic. Units will handle shrink-wrap, shredded paper, paper bags and sacks, plastic bags, both plastic and steel strapping, as well as food and paint cans. Press force is 12 tons, and the 3210 produces bales of 31-inch by 24-inch by 23-inch (depth/ width/height). Bale weights vary from 176 pounds for cardboard up to 220 pounds for shrink-wrap and plastic. The Orwak 3410 front-loaded baler is equipped with a “latch and wheel” door lock for safer door opening, an autostart function, and a sliding door that opens automatically after each cycle. Capacity is up to 300 kg for cardboard and 450 kg for plastic.