Recycling Product News Logo

Closed-loop pilot project to determine feasibility of recycling single-use face masks

A box of single-use face masks
In a circular economy pilot project, Fraunhofer, SABIC and Procter & Gamble have demonstrated the feasibility of closing the loop on facemasks to help reduce plastic waste and mitigate fossil resources depletion.

Fraunhofer Institute UMSICHT, SABIC and Procter & Gamble (P&G) will collaborate in an innovative circular economy pilot project which aimed to demonstrate the feasibility of closed-loop recycling of single-use face masks.

Due to COVID-19, use of billions of disposable face masks is raising environmental concerns especially when they are discarded in public spaces, including parks, open-air venues and beaches. 

Apart from the challenge of dealing with such huge volumes of essential personal healthcare items in a sustainable way, simply throwing the used masks away for disposal on landfill sites or in incineration plants represents a loss of valuable feedstock for new material.

"Recognizing the challenge, we set out to explore how used face masks could potentially be returned into the value chain of new face mask production," says Dr. Peter Dziezok, Director R&D Open Innovation at P&G. "But creating a true circular solution from both a sustainable and an economically feasible perspective takes partners. Therefore, we teamed up with Fraunhofer CCPE and Fraunhofer UMSICHT's expert scientists and SABIC's Technology & Innovation specialists to investigate potential solutions."

As part of the pilot, P&G collected used face masks worn by employees or given to visitors at its manufacturing and research sites in Germany. Although those masks are always disposed of responsibly, there was no ideal route in place to recycle them efficiently. To help demonstrate a potential step change in this scenario, special collection bins were set up, and the collected used masks were sent to Fraunhofer for further processing in a dedicated research pyrolysis plant.

"A single-use medical product such as a face mask has high hygiene requirements, both in terms of disposal and production. Mechanical recycling would not have done the job," explains Dr. Alexander Hofmann, Head of Department Recycling Management at Fraunhofer UMSICHT. "In our solution, therefore, the masks were first automatically shredded and then thermochemically converted to pyrolysis oil. Pyrolysis breaks the plastic down into molecular fragments under pressure and heat, which will also destroy any residual pollutants or pathogens, such as the coronavirus. In this way it is possible to produce feedstock for new plastics in virgin quality that can also meet the requirements for medical products."

The pyrolysis oil was then sent to SABIC to be used as feedstock for the production of new polypropylene (PP) resin. The resins were produced using the widely recognized principle of mass balance to combine the alternative feedstock with fossil-based feedstock in the production process. 

Mass balance is considered a crucial bridge between today's large scale linear economy and the more sustainable circular economy of the future, which today is operated on a smaller scale but is expected to grow quickly.

"The high-quality circular PP polymer obtained in this pilot clearly demonstrates that closed-loop recycling is achievable through active collaboration of players from across the value chain," emphasizes Mark Vester, Global Circular Economy Leader at SABIC. "The circular material is part of our TRUCIRCLE portfolio, aimed at preventing valuable used plastic from becoming waste and at mitigating the depletion of fossil resources."

Finally, to close the loop, the PP polymer was supplied to P&G, where it was processed into non-woven fibre material. "This pilot project has helped us to assess if the close loop approach could work for hygienic and medical grade plastics," says Hansjörg Reick, P&G Senior Director Open Innovation. "Of course, further work is needed but the results so far have been very encouraging."

The entire closed loop pilot project from face mask collection to production was developed and implemented within only seven months. The transferability of advanced recycling to other feedstocks and chemical products is being further researched at Fraunhofer CCPE.

Company info

One Procter & Gamble Plaza
Cincinnati, OH
US, 45202

Website:
pg.ca/en-ca

Read more

North American HQ
Houston, TX
US,

Website:
sabic.com

Read more

Related Articles