This ad will close in 15 sec

WorkSafeBC raising awareness about cannabis impairment in the workplace

WorkSafeBC is launching an awareness campaign to educate employers and workers about impairment in the workplace, as the legalization of recreational cannabis takes effect October 17.

"Impairment in the workplace isn't a new issue in B.C., but it's become top of mind as cannabis becomes legal for recreational use," said Tom Brocklehurst, director of prevention practices and quality for WorkSafeBC. "We're reaching out to employers and workers to remind them that they share responsibility for managing impairment in the workplace."

Under current occupational health and safety regulations, employers must:
• Not allow a worker who is impaired for any reason – alcohol, drugs (including cannabis), or any other substance – to perform work activities that could endanger the worker or anyone else.
• Not allow a worker to remain at any workplace while the worker's ability to work safely is impaired by alcohol, drugs or any other substance.

Employers also need to make workers aware of their responsibilities, including:
• Making sure that their ability to work safely is not impaired by alcohol, drugs or other causes. This means showing up fit to work and remaining so throughout the work day.
• Not working if their impairment may endanger them, or anyone else.
• Notifying their supervisor if their ability to work safely is impaired for any reason.

"The legalization of recreational cannabis provides a good opportunity for employers and workers to be reminded about workplace-safety policies and practices," said Harry Bains, Minister of Labour and minister responsible for WorkSafeBC. "Every worker has the right to go home, safe and sound, at the end of their shift."

WorkSafeBC is advising employers to develop policies and procedures that address impairment in the workplace. To assist, WorkSafeBC has created a guide for managing workplace impairment and developing a policy. The need for an impairment policy is even more relevant with the legalization of recreational cannabis.

"An impairment policy that takes a fit-to-work approach to impairment can help employers meet their workplace-safety obligations," said Brocklehurst. "It's also very important that employers clearly communicate their impairment policy to workers."

WorkSafeBC's awareness campaign includes online educational materials and radio ads in major markets across the province starting Oct. 22, including Kamloops, Kelowna, Prince George, Vancouver/Lower Mainland and Victoria. Radio ads in Vancouver will include Cantonese, Mandarin and Punjabi languages.

Company Info

Latest News

Tags
C&D Recycling

Metso to expand NW Rapid crushing plant range

The NW Rapid series models are electric driven and they have Metso's IC(TM) Series crushing automation as a standard feature.

Metso is introducing new higher capacity models to its popular wheel-mounted Metso NW Rapid series. In addition to a bigger jaw crusher model, the NW Rapid units are now also available with a variety of robust cone crushers, including the first model with the MX crusher. Easily transportable using standard prime movers, over a thousand NW Rapid models have already been sold into aggregates and C&D recycling applications.

Read More

Tags
Composting

Composting Council Research Education Foundation releases report on soluble salts in compost

Composting Council Research Education Foundation releases report on soluble salts in compost

Compost contains a multitude of essential nutrients for plant growth, such as nitrogen (N), phosphorus (P) and potassium (K), and can also be a source of organic matter. However, recent concerns and criticisms have been directed toward composts with a high concentration of soluble salts. Soluble salts refer to the amount of soluble ions, such as calcium (Ca2+), potassium (K+), magnesium (Mg2+) and sodium (Na+), present in compost. Soluble salts are measured indirectly and cumulatively through electrical conductivity (EC). 

Read More

Tags
Industry News

Sierra International Machinery announces acquisition of Wolf Pack Enterprises and establishment of East Coast Service Center

Left to right: Jose Pereyra, John Sacco, Wayne Wolf, Antonio Torres and Doug Barnett.

Sierra International Machinery has announced the acquisition of Wolf Pack Enterprises, a heavy equipment service provider based in New Jersey, and the establishment of the Sierra East Coast Service Center. Wolf Pack Enterprises has been the preferred contract service provider for Sierra equipment since 2012.

Read More

Tags
Fleets & Technology

Portable vehicle scales​ help heavy-haul carriers stay compliant

Heavy-haul carriers transport oversized objects using public roadways. While these loads may weigh hundreds of thousands of pounds, operators must still comply with permitted limits, while also completing their job safely. Intercomp has a variety of options to fill this unique application for a range of applications including construction, oil & gas, waste and recycling, heavy-haul transportation and electrical utility.

Read More

Tags
Tire Recycling

Over $11 million in grants issued by CalRecycle to help fund tire recycling

Over $11 million in grants issued by CalRecycle to help fund tire recycling

The California Department of Resources Recycling and Recovery (CalRecycle) based out of Sacramento, has issued grants totalling nearly $11.1 million to 31 communities and nine businesses to fund projects to reuse and recycle waste tires. CalRecycle announced the grants January 4 under its Tire Incentive Program and its Rubberized Pavement and Tire-Derived Aggregate grant programs.

Read More

EuPC publishes results of its 2nd survey on the use of recycled plastics materials

EuPC publishes results of its 2nd survey on the use of recycled plastics materials

From January till September 2018, the European Plastics Converters Association (EuPC) conducted its 2nd European survey on the use of recycled plastics materials (rPM) in Europe's plastics converting industry. Following the period of 9 months during which 376 companies from 21 different countries filled in the online questionnaire, EuPC now published the results in cooperation with Polymer Comply Europe SCRL. (PCE), which conducted the survey on behalf of EuPC.

Read More

Tags
C&D Recycling
Industry News

Anaconda Equipment joins McLanahan family of companies

While Anaconda is joining the McLanahan family of companies, they will continue to operate in the marketplace as an independent brand. Their dealer network will remain and continue to support Anaconda customers around the globe.

In 2017, McLanahan Corporation began a partnership with Anaconda Equipment of Northern Ireland to distribute and sell Anaconda's line of mobile track equipment. As the relationship between the two companies progressed, it became clear that their values and business styles were closely aligned. Today, the two companies are proud to announce that Anaconda Equipment will officially join McLanahan Corporation's family of companies upon legal closing within the next 30 to 60 days.

Read More

Tags
Plastics Recycling

​Nestlé Waters North America aiming for 25 percent recycled plastic in its packaging by 2021

​Nestlé Waters North America aiming for 25 percent recycled plastic in its packaging by 2021

Nestlé Waters North America (NWNA) announced in December that it will achieve 25 percent recycled plastic across its U.S. domestic portfolio by 2021. The company plans to continue expanding its use of recycled materials in the coming years, further setting an ambition to reach 50 percent recycled plastic by 2025.

Read More

Tags
Tire Recycling

Goudsmit builds magnets for iron-free carbon black

Goudsmit builds magnets for iron-free carbon black

Goudsmit recently built two magnets to be used for the production of iron-free carbon black by a large European manufacturer. These self-cleaning, rotating magnets remove iron particles as small as 30 microns from the very dry, poorly flowing conductive carbon black used for lithium-ion batteries.It is essential that this product is 100% metal-free, because metal particles would change the conductivity. In this line, the rotating magnets process at a relatively low capacity of 1500 kg per hour. If necessary, however, such magnets can process at  capacities of up to 40 m3 per hour. 

Read More

Tags
Plastics Recycling

BASF making products with chemically recycled plastics for first time

Dr. Stefan Gräter and Dr. Andreas Kicherer showing a sample of pyrolysis oil and thus produced plastic in front of the Steamcracker.

BASF is breaking new ground in plastic waste recycling with its ChemCycling project. Chemical recycling provides an innovative way to reutilize plastic waste that is currently not recycled, such as mixed or uncleaned plastics. Depending on the region, such waste is usually sent to landfill or burned with energy recovery. But chemical recycling offers another alternative: Using thermochemical processes, these plastics can be utilized to produce syngas or oils. The resulting recycled raw materials can be used as inputs in BASF's production, thereby partially replacing fossil resources.

Read More

Tags
Paper Recycling
Plastics Recycling

SamurAI sorting robot finding success in the recycling industry

In the spring of 2018, Plessisville, Quebec-based Machinex introduced its new SamurAI sorting robot, which, according to the manufacturer, has since generated a lot of industry interest. Nearly six months after its launch, the response of the market has been very positive and nine robots have been sold to date. The first two SamurAI in Canada have just been installed in Quebec while six more robots will be installed by next year in Canadian sorting centers. Moreover, the company says they continue to have regular requests from customers who are greatly interested in this cutting-edge technology.

Read More

Tags
Maintenance & Management

Electro Static Technology appoints Mathew Laufik as global sales manager

Electro Static Technology appoints Mathew Laufik as global sales manager

Electro Static Technology, the manufacturer of AEGIS Shaft Grounding Rings, and specialist in low- to medium-voltage motor protection technology, has appointed Matthew Laufik as Global Sales Manager.  In this new role, Mr. Laufik will be responsible for the sales of AEGIS products to motor repair shops, motor manufacturers and end users in a range of processing industries worldwide through the company's international sales organizations and distribution network.  He will also manage all sales, marketing, and customer service personnel.

Read More

Tags
C&D Recycling
Environmental
Occupational Health & Safety
Solid Waste

Latest mobile dust suppression design features Tier 4 Final Gen Set

The DB-60 Fusion dust suppressor features a Tier IV Final-compliant generator.

BossTek has updated its family of self-powered dust suppression equipment with Tier IV Final-compliant generators, ensuring compliance in all 50 states and Canada.  BossTek made the announcement with the debut of the new DustBoss DB-60 Fusion, a field-proven suppression system driven by a high-reliability 25 HP electric motor and paired with a gen set powered by a heavy-duty 4-cycle indirect injection diesel engine.  Designed, engineered and assembled in the USA, the generator features a dual-containment fuel cell, heavy gauge lockable enclosure and oversized brushless alternator for easy starting.  

Read More