Recycling Product News Logo

Terex Finlay launches new I-100RS Impact Crusher

0053/13214_en_36395_27476_terex_finlay_i_100rs_recycle_dec2013_jf14p.jpg

Company info

Drumquin Road
Co. Tyrone
Omagh,
IE, BT78 5PN

Website:
terexfinlay.com

Read more

The NEW Terex® Finlay I-100RS direct drive 860mm x 860mm (34” x 34”) horizontal impact crusher with variable speed gives operators unprecedented levels of fuel efficiency and production in both recycling and quarrying applications. The robust and proven Terex chamber gives excellent reduction ratios and high consistency of product shape.   

The machine features an on-board 2.44m x 1.2m (8’ x 4’) single deck screen for sizing and recirculating oversize material back to the crushing chamber. The sizing screen can be quickly detached for applications that do not require resizing or recirculation of materials for further processing. The I-100RS features hydraulic folding of all conveyors providing rapid set-up times and easy point to point moves when operating on multiple sites.  

The I-100SR also features an advanced electronic control system that monitors and controls the speed of the rotor and regulates the heavy duty vibrating feeder (VGF) with integrated pre-screen to maintain a consistent feed of material into the impact chamber for optimal crushing conditions. Material from the integrated pre-screen can be diverted to a stock pile via the optional  by-pass conveyor, or it may join the crushed product on the main belt.  The standard hopper capacity of 2.3m³ (3.01yd³) places the machine at the forefront in this competitive market sector.   

With tracked mobility this machine is capable of working in the most demanding of environments and features a rapid set-up time . Units also feature a heavy duty chassis, with convenient access points and ladders to all service areas.  

Startup time for the Terex® Finlay I-100RS is minimal, with the machine ready for crushing in less than 15 minutes. The heavy duty crawler tracks, and optional radio remote control unit, make on site mobility very easy. A key additional benefit of the machine is the inbuilt hydraulic assist apron adjustment for the impact chamber.   

Key Features of the Terex Finlay I-100SR Impact Crusher include:  

• Direct drive 860mm x 860mm (34” x 34”) crusher chamber with unique belt tensioner system allowing for rapid adjustment.

• Hydraulic apron setting assist provides convenient and efficient adjustment of the aprons and hydraulic over¬load protection in event that an un-crushable object enters chamber.

• Detachable 2.4m x 1.2m (8’ x 4’) single deck screen returns oversize material back to the crusher via the on-board recirculating system.

• Quick and easy detachable screen, fines and transfer conveyor for open circuit crushing.

More from C&D Recycling

CBI introduces C400CT grinder and presents Frontline Machinery with Dealer of the Year award

Continental Biomass Industries (CBI) premiered the 6400CT Horizontal Grinder and Chipper at the 2019 Factory Forum in Newton, New Hampshire. The 6400CT processed steel contaminated railroad ties along with a mix of construction and demolition debris to headline the range of environmental equipment at the show.

Metso launches new Nordtrack mobile crushing and screening product range

Metso is expanding its mobile crushing and screening solutions offering for the aggregates industry with an extensive new product portfolio. The new Metso Nordtrack range introduces 19 products designed to meet the requirements of general contractors in particular. The first deliveries are expected to take place during the first quarter of 2020.

McCloskey acquisition by Metso completed

Metso's acquisition of McCloskey International, a Canadian mobile crushing and screening equipment manufacturer, has been successfully completed. With this acquisition, Metso expands its offering in the aggregates industry globally and strengthens its customer reach especially to the general contractor segment. The acquisition was completed on October 1, 2019.

Priestly Demolition uses Mantovanibenne combi cutter to tear down old Toronto SickKids building

When it comes to large scale demolition, Mantovanibenne's combination crushers are ideal tools for tackling reinforced concrete and metal structures. These Italian-made attachments incorporate characteristics of crushers and shears to deliver performance even in the toughest of situations. These crushers' performance comes from the powerful cylinders and the twin pin system that contribute to the breaking and cutting force. The jaws incorporate sharp shear shaped blades that guide the cutting power to be executed in a clean controllable manner for the operator.

Rotochopper hosts 9th annual Demo Day

Rotochopper hosted customers and prospects from around the world at their 9th Annual Demo Day event held September 12th at the company's headquarters in St. Martin, Minnesota. The Rotochopper team and over 200 guests were not hampered by the inclement weather this year, with the schedule of machine demos, factory tours, educational sessions and networking filling the day. The event was organized around the theme "Partnership Through Innovation", which is a key value of the work that Rotochopper does every day.

Thompson Recycle Company slashes fuel and maintenance costs, minimizes downtime with Volvo Penta-powered generators

Thompson Recycle Company reprocesses mountains of used asphalt rubble every year with its three mobile crushing plants in Michigan. The mobile plants use generators as their prime power source at road construction sites. Since switching to Volvo Penta-powered 600 kWe generators, they're saving hundreds of thousands of dollars per year in fuel and maintenance costs, not to mention less downtime.

Subscribe to our free newsletter

Get our newsletter

Learn more

Multitasking Sennebogen material handler is right toolkit for urban dismantling projects

After ten years of seeing the former Wangler furniture store stand vacant, local residents in Regensburg, Germany were pleased to see a crew from Metz GmbH arrive to tear down the building. At the center of the jobsite is a SENNEBOGEN 830 R-HDD E Series material handler fitted with a variety of attachments to bring down and extract the material, sort it and load it for on-site crushing.

Powerscreen adding Premiertrak 330 to jaw crusher range

Powerscreen is adding the Powerscreen Premiertrak 330 to its jaw crushing range. The new Premiertrak 330 is fitted with a simple, large fixed hopper improving setup time, reducing pegging and increasing the life of wear parts. The hydrostatic drive allows reversibility of the chamber, meaning the machine can unblock and run in reverse, allowing easier crushing of certain materials. In addition to this, a low engine speed improves fuel consumption and provides lower noise emissions for working in urban or restricted areas.

ShearCore's Fortress Cracker does double duty taking on primary and secondary demolition

ShearCore's Fortress Cracker is a primary demolition shear with the ability to do secondary demolition.
• Narrow Stick body for improved visibility.
• Removable isolated bottom cover provides exceptional access to all serviceable components.
• Unique pin retention eliminates weld-on cylinder pin keeper.
• Tight blade clearances allow rebar to be processed throughout the entire jaw length.
• Full-length side plates are machined from solid three-inch high-yield structural plate steel resulting in no weld seams.

First ZenRobotics AI-powered sorting system operational in California at Zanker Recycling

San Jose-based Zanker Recycling, a U.S. based specialist in construction and demolition (C&D) materials processing systems and recycling, in partnership with Plexus Recycling Technologies, the North American distributor of ZenRobotics, have announced that ZenRobotics' ZRR2 AI Robots are now officially operational at Zanker Recycling's San Jose site.

NPK demolition grabs efficient for sorting and recycling C&D waste

For use with excavators in the 11- to 44-ton range, these NPK grabs' high durability and low maintenance cost make them highly efficient for sorting and recycling C&D waste.
• High tension, special wear steel.
• 360-degree hydraulic rotation.
• They have a wide jaw opening and offer high closing force.
• Fully encased, easily accessible hydraulic components.
• Adjustable rotation speed and opening/closing speed
• Interchangeable and reversible cutters.
• Optional side covers and/or arm covers for loading activities and optional breaker plates for special demolition jobs.

Epiroc combi cutters serve up one-two crunch

These multi-purpose hydraulic attachments from Epiroc are for primary demolition and secondary reduction of concrete structures, as well as for cutting steel structures.
• For carriers 33,000 pounds to 188,000 pounds (16.5 tons to 94 tons).
• Two powerful hydraulic cylinders deliver constant closing forces with short open-close cycle times.
• Low noise, low vibration.
• 360-degree endless hydraulic rotation to allow optimal positioning and precise handling.
• Replaceable and reversible cutting blades with attachments that can be equipped with different type jaws.

NPK demolition tool crushes reinforced concrete with ease

For use with excavators in the 21 to 50 ton range, these attachments from NPK easily crush through reinforced concrete allowing for faster, more efficient separation of concrete and steel rebar for primary and secondary demolition.
• Abrasion-resistant, high-strength alloy steel teeth decreases wear and increases durability.
• Optional 360-degree power rotation for maximum versatility.
• NPK's exclusive hydraulic intensifier system provides faster cycle times while requiring less flow and pressure from the carrier when compared with units using larger cylinders.
• Bolt-on replaceable tooth plate on the movable jaw.
• "A" models also utilize bolt-on tooth plate on the fixed jaw.

Caterpillar multi-processors for a variety of specialized demolition tasks

These heavy-duty, high-production tools from Caterpillar accept multiple interchangeable jaws for a variety of specialized demolition tasks.
• Speed booster technology dynamically shifts hydraulic force from speed to boost mode automatically during operation.
• Maximum crushing/cutting force is applied as soon as the jaw contacts material.
• Compact design keeps centre of gravity as close as possible to the machine for more power, even on a smaller excavator.
• Most cutting blades can be flipped in two ways, to use four different cutting edges for more production time per cutter.

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more

Superior and CMS Cepcor create partnership for crusher parts in North America

Superior Industries Inc., a U.S. based manufacturer and global supplier of bulk material processing and handling systems, says it has entered into a strategic partnership with Europe's largest manufacturer of aftermarket crusher parts. For 40-plus years, CMS Cepcor has manufactured premium crusher spares for more than three dozen active and classic brands throughout Europe. The parts manufacturer recently expanded its global footprint when it launched CMS Cepcor Americas.

Watch Priestly Demolition demolish underground parking garage in confined downtown Toronto

Priestly Demolition is known for its tricky takedowns of old infrastructure in Ontario. Watch the company demolish a city-block-sized underground parking garage on busy Bay Street in downtown Toronto. Challenges include limited space for machine storage and need to keep roads clear for children's hospital emergency vehicle access.

New location to double production capacity for Rockster

Continuous expansion, high quality standards as well as short delivery deadlines made such a step necessary for the manufacturer of mobile crushing and screening machinery, Kormann Rockster Recycler GmbH from Ennsdorf. The acquisition of a 10,000 m² property in Neumarkt im Mühlkreis (Upper Austria) promises to provide a strong and needed force in a continuous growth and market demand.

KINSHOFER P-series orange peel grapples handle heavier loads and increase efficiency

KINSHOFER offers an extensive range of excavator orange peel grapples for scrap, demolition, loading and unloading applications. Unlike competitive grapples, according to Kinshofer, the P-Series hydraulic system is fully enclosed and protected, reducing the risk of damage to hoses and other components. Additionally, the grapple's unique tine design enhances material penetration, increasing the amount contractors can safely secure in one cycle and saving time on the jobsite. 

Subscribe to our free newsletter

Get our newsletter

Learn more

Versatility and mobility: an in-depth report on impact crushers

Impact crushers have broad appeal across various sectors and for good reasons. Our panel of experts provides insight as to why this is, plus information on the dynamic market for impact crushers in Canada, their applications and advantages, customization and options, as well as what to consider when buying an impact crusher.

New Pitbull Grizzly screen an economical option for small- to mid-sized contractors

Lake Erie Portable Screeners introduces the heavy-duty Pitbull PB678 Static Grizzly. The compact screen is a smaller version of the popular PB148 for added jobsite versatility and pairs well with the Pitbull 2300 screening plant, making it an economical option for operations looking for a compact solution to sort oversize material on a reduced scale. The PB678 Static Grizzly includes features for easy bar removal or adjustments as well as transportability. It is ideal for a wide range of industries, including aggregates, mining, scrap, excavation, demolition, forestry and landscaping.

CDE latest intelligent plant using AI technology

At bauma 2019, CDE launched a new intelligent wet processing plant featuring the manufacturer's pioneering next generation technology. The new plant utilises advances in machine learning and the Internet of Things (IoT) to monitor and automate previously manual processes, for application in quarries, mines and recycling operations. Enabling the plant to make smart decisions in real time, this latest model can boost productivity by up to 40 percent with a payback period of under six months. (Based on outcome for a beta testing customer in Europe.)

Subscribe to our free magazine

Get Our Magazine

Paper or Digital delivered monthly to you

Subscribe or Renew Learn more