Tags
C&D Recycling

EvoQuip shows new Cobra 230 impact crusher at World of Asphalt

EvoQuip will showcase the newest addition to their impact crushing range, the Cobra 230 at World of Asphalt in Texas from March 6-8, 2018, in booth 1858. 

Matt Dickson, EvoQuip, Product Line Director said, "The Cobra 230 Impact Crusher is a machine that provides class leading productivity, unmatched versatility and excellent fuel efficiency. The quick set up times, simple intuitive operation and ease of transport makes this machine an ideal solution for all applications.

The Cobra 230 has been field tested with J & V Construction in Ireland. Gerd McCann, J & V Construction Director, said "The EvoQuip Cobra 230 has managed to surpass our expectations, handling a mix of difficult rock and heavy duty recycled concrete with ease, and turning it into products we have been able to reuse on our construction sites."

The rapid set up time and intuitive control system on the Cobra 230 enables the operator to be crushing minutes after unloading the machine from the truck. The operator can also adjust the crusher setting easily without the need for any tools using the user friendly hydraulic assist that is standard on the machine.

There are a number of key design features in the Cobra 230 that ensure an optimal material flow through the crushing process. As material moves from the feeder through the impactor onto the product belt each section becomes wider ensuring an unrestricted flow. The excellent under crusher clearance, the short distance from the crusher discharge to the magnet and the ability to lower the product conveyor while running make the Cobra 230 the ideal machine in all applications.

The Cobra 230 uses an extremely fuel efficient and high performing direct drive system to power the impact crusher. This along with the two independent hydraulic controlled aprons allows the operator to optimize the material throughput and reduction whilst ensuring the best fuel efficiency.

Serviceability has been integral throughout the design and development of the Cobra 230. With ground level access to the engine, hydraulics, service and refueling points, it ensures maintenance is easy for the operator. This is further enhanced with features such as the hinged radiator pack and hinged diesel tank.

The compact footprint makes the Cobra 230 easy to transport and also makes it an ideal machine for working in urban areas.

Company Info

Related Products

Latest News

Geotab Surpasses One Million Subscribers

Geotab Surpasses One Million Subscribers

Geotab has announced it has surpassed one million subscribers, positioning the company as one of the fastest growing providers of telematics globally. Launching their subscriber-based solution in 2006, Geotab has seen an average of 116% annual subscriber growth over the last 10 years. "Early in 2017, we announced our company team goal to be the first fleet telematics company to achieve one million connected vehicles built on a single, open platform," says Neil Cawse, CEO, Geotab. "Together we have grown to support over 21,000 businesses, 300,000 users, and 1,000,000 vehicles around the world by focusing on sustainability, scalability, reliability and security."

Read More

Tags
C&D Recycling

How Government policy can help C&D recyclers

How Government policy  can help C&D recyclers

Several actions can be taken by governments at all levels to support the recycling of construction & demolition industry waste products. One of the most common tactics is landfill disposal bans on recyclable materials in the waste stream. Two examples are the ban on drywall disposal in British Columbia, and the requirement in King County, Washington that all C&D loads with more than 20 percent recyclable material be rejected at the transfer station and sent to a Material Recovery Facility.

Read More

Tags
Industry News
Plastics Recycling

Coast Waste Management Association meeting focused on plastics recycling

Talking plastics at the CWMA February 2018 meeting and conference in Nanaimo, B.C., from left: Rustam Punja, Geocycle, Craig Foster, CPIA; Ian Kidd, CasCell Trading ; Pat McLaughlin, King County Solid Waste Division; and Will Burrows, executive director of the Coast Waste Management Association.

On February 16th, the Victoria, B.C.-based Coast Waste Management Association hosted a meeting and seminar called Plastics Management - economic, market and regulatory trends affecting plastics.  The conference, held in Nanaimo, B.C., brought together close to 80 delegates from Vancouver Island and around the province, and as far away as the Yukon and Washington State, including an expert industry panel. The goal of the meeting was to discuss present market conditions and what can be done to adapt, in light of China's recently established policy on regulations surrounding import of recycled materials. Attendees were briefed on work that is being done to address the issue, alternative markets for plastics and what we might expect to see going forward. 

Read More

Tags
Fleets & Technology

Galbreath launches versatile TH-14 Trail Hoist

Galbreath launches versatile TH-14 Trail Hoist

Galbreath, a leading manufacturer of hoists, container handlers and trailers, recently launched its TH-14 trail hoist. Built to last and stand up to the toughest jobs, the TH-14 offers the perfect solution for small independent waste haulers, roofers, contractors, landscapers and municipalities looking for a versatile piece of equipment that can be used to perform a wide range of hauling applications.

Read More

Tags
Plastics Recycling

BHS' ​Max-AI AQC selected for APR Plastics Recycling Showcase

The Max-AI AQC (Autonomous Quality Control) has been selected for recognition as a part of the Association of Plastic Recyclers' (APR) 2018 Plastics Recycling Showcase. The Max-AI AQC was launched in 2017 by Eugene, Oregon-based Bulk Handling Systems (BHS) and Nashville, Tennessee-based National Recovery Technologies (NRT). The selection was announced during a recent APR Technical Forum, held February 12, in conjunction with the Plastics Recycling Conference in Nashville. NRT President Matthias Erdmannsdoerfer presented at the forum, and earlier in the day conference attendees visited NRT's headquarters to see live demonstrations of the Max-AI AQC.

Read More

Tags
Metals Recycling

Tri-State Iron & Metal achieves higher yield on ferrous shred with Eriez' ballistic separator

The Eriez Shred1 ballistic separator is designed to efficiently separate iron-rich ferrous from the mixed metals and waste material in the post-drum magnet flow, produces a premium low-copper shred.

Scrap processors are continuously seeking new and innovative ways to obtain a premium ferrous shred which yields a higher value per ton and meets the most stringent steel mill standards. 

Read More

Tags
Plastics Recycling

End-of-Life Vehicles Project paves way for recycling plastics from automobiles

End-of-Life Vehicles Project paves way for recycling plastics from automobiles

A promising future exists for successfully recycling plastics recovered from automobiles, according to the Plastics Industry Association (PLASTICS), which released results from Phase I of its End-of-Life Vehicle (ELV) Recycling Demonstration Project today. The results demonstrate both the technical and economic feasibility of collecting and reprocessing certain plastic auto parts so they can either be put back to use in automotive applications or reborn as new products. Work continues through phases two and three of the project.

Read More

Tags
Industry News
Metals Recycling
Paper Recycling
Plastics Recycling

​ISRI launches ISRI Connect Mobile App for members and industry stakeholders

​ISRI launches ISRI Connect Mobile App for members and industry stakeholders

In an industry based on connections, being able to network and access key information wherever you are, is essential to a successful business. The new mobile app launched by the Institute of Scrap Recycling Industries (ISRI), ISRI Connect, is built around this concept and the importance of networking, news and information, and industry resources.

Read More

Kinshofer NOX-Tiltrotators have cylinderless design and only two grease points

According to Kinshofer, the NOX-Tiltrotator's cylinderless design provides a narrower tool than other manufacturers' tiltrotators.

Kinshofer's NOX-Tiltrotators have a universal joint that offers 360-degree continuous rotation and tilting angles of up to 2 by 55 degrees, which the company says is the widest in the industry. The Tiltrotator features an elliptical piston, rather than a cylinder, for a streamlined design and high-power performance in a variety of tight areas and applications, such as road construction, general construction and city snow removal.

Read More

Tags
Metals Recycling
Paper Recycling
Plastics Recycling

Despite China’s ban, overall U.S. scrap exports remain strong in 2017

Despite China’s ban, overall U.S. scrap exports remain strong in 2017

News that China would ban certain scrap imports shook the recycling industry last summer, yet U.S. global scrap exports increased overall in 2017 according to a new analysis from the Institute of Scrap Recycling Industries (ISRI). As improved demand for ferrous and nonferrous metal scrap more than offset weaker demand for non-metallic scrap, total U.S. scrap exports advanced in 2017 in both value and volume terms. 

Read More

Tags
Metals Recycling

Sennebogen provides right combination for CRC Scrap Metal Recycling

Loading their 750-ton logger/baler/shear is a primary responsibility of CRC's new SENNEBOGEN 825 scrap handler.

When Blake Stanley graduated from college, he immediately joined the new metals recycling company that his grandfather, Ronnie Strange, had started up just months before. Strange launched the business with the help of two other partners, and Blake soon learned that who you know is often as important as what you know, to get a new enterprise off the ground.

Read More

Tags
Industry News

Lindner Recyclingtech GmbH invests in North American expansion

Lindner Recyclingtech GmbH invests in North American expansion

Lindner Recyclingtech GmbH, a European leader in industrial stationary and mobile shredding equipment, has opened its new North American headquarters located in Statesville, North Carolina.  In late 2017 the company completed the purchase and renovation of a 25,000 square foot facility on a 4-acre campus along with renaming its fully owned US subsidiary to Lindner Recyclingtech America.  The new facility is focused on expansion of the Lindner parts inventory and service support team, along with a fully operational customer demonstration and test lab facility.

Read More