Tags
C&D Recycling

Haver & Boecker Hydro-Clean 1000 Wash Plant offers semi-portability on custom skid structure

Haver & Boecker introduced the skid-mounted Hydro-Clean 1000 Wash Plant as a complete solution at CONEXPO. In addition to a Hydro-Clean 1000 washing system combined with a Tyler L-Class vibrating rinse screen, Haver & Boecker now offers semi-portability by mounting the complete system on a custom skid structure. The opportunity to purchase the three components together saves operations months of time they would have spent on designing and building a skid structure for a wash plant. The new package delivers maximum serviceability in a small footprint.

“We’re always looking for ways to solve our customers’ problems and improve their productivity and efficiency,” said Karen Thompson, president of Haver & Boecker Canada. “By offering the Hydro-Clean 1000 Wash Plant, we’re saving producers from spending extensive time on engineering and manufacturing a structure for a wash plant. This gives them an opportunity to focus their time and money on improving profits elsewhere in their operations.”

Haver & Boecker combines the Hydro-Clean 1000, a single-deck, linear-stroke, 6-by-16-foot Tyler L-Class horizontal vibrating rinse screen and a skid structure to create the compact wash plant. The system processes as much as 200 tph of sellable product with its short retention times, using minimal water and power. During the cleaning process, the washed material works its way down the HC1000’s drum and exits onto a discharge conveyor that leads to the L-Class wash screen. The vibrating screen removes any remaining dirt or clay still on the stone as it fractionates the material. Haver & Boecker engineers drew on their extensive experience to design and build a skid structure perfectly suited for the semi-portable system.

Taking feed material as large as 6 inches (150 millimeters) into its 40-inch vertical drum, the Hydro-Clean 1000 employs 2,000 psi high-pressure nozzles, rotating at 90 rpm, to remove silt and clay particles as small as 63 microns from mineral mixtures.

The wash plant’s other major component, the L-Class vibrating screen, uses a double-shaft overhead drive system, with direct-mounted motors, to provide multiple speed and stroke combinations in a compact design. With a horizontal screen, material spends more time on the deck for optimal cleanliness.

The HC1000 Wash Plant includes serviceability features for maximum convenience and safety. Haver & Boecker manufactures the plant with stairs, eliminating the dangers of carrying parts and tools up ladders. In addition, mechanics can easily use the plant’s catwalks and platforms to reach service points, such as spray nozzles.

Haver & Boecker can engineer wash plants to customer specifications by, for example, including a different size or type of vibrating screen, more decks or a different Hydro-Clean model.

Company Info

Related Products

Latest News

Tags
Metals Recycling

Liebherr supplies cylinders for new scrap shears by Genesis

They cut everything to pieces: car bodies, steel girders, entire ships and aircrafts. Scrap shears are the choice when it comes to crushing iron and other metals. One of the premium manufacturers is Genesis GmbH, which produces scrap and demolition shears of different sizes in Memmingen (Southern Germany) for users in Europe, Asia and Africa. For the new mobile scrap shears, which has a high cutting force even with a comparatively small carrier, once again turned to Liebherr-Components Kirchdorf GmbH for its robust, compact and durable hydraulic cylinders.

Read More

Tags
Wood Recycling

Latest mechanical, hydraulic and screw extrusion presses for briquetting applications available from Briquetting Systems

The CF Nielsen  Quattro hydraulic press, available in Canada from Briquetting Systems,  processes various dry wood particulate, including wood dust, producing briquettes from mixed wood materials, including manufacturing plant dust, which can then be used in consumer wood stoves and fireplaces.

Briquetting Systems is a multi-line distributor based out of Vancouver, B.C. Recently, the company announced the availability of two new mechanical presses from manufacturer C.F. Nielsen AS, a leading manufacturer of mechanical briquetting presses based out of Denmark. From raw material - including agricultural waste, wood, paper, plant dust and other biomass residues and wastes - C.F. Nielsen's full-line of briquetting solutions produce briquettes for use in large boilers and power plants as well as log-type briquettes for use in fireplaces and wood-burning stoves by consumers.

Read More

Tags
Industry News

EREF Partners with the CRRC on the EREF Summit on Organics

The Environmental Research & Education Foundation, in collaboration with the California Refuse Recycling Council, will host the EREF Summit on Organics in Ontario, California on July 25 & 26. This educational event will feature a full day of presentations and discussions from organics management experts followed by a half-day tour of two composting facilities.

Read More

Tags
Industry News

GreenWaste Selects BHS for Mixed Waste MRF

GreenWaste Recovery commissioned a 40-tph Mixed Waste Material Recovery Facility (MRF) in May 2007. That system was awarded SWANA's 2008 Gold Award for Recycling Excellence. More than 10 years later, GreenWaste is ready to expand. As they did in 2007, GreenWaste once again selected Bulk Handling Systems (BHS) to provide a state-of-the-art mixed waste processing system. The new two-line system will double overall throughput capacity to more than 80-tons-per-hour and includes updated technology, including five Max-AI™ Autonomous Quality Control (AQC) units.

Read More

Understanding the Changing Catalytic Converter Landscape

The catalytic converter industry has been constantly evolving over the last 25 years. Many of you in the scrap industry will remember back in the day when converter buyers would come and purchase with just three grades in mind: small, medium and large. My, how things have changed. We now have over 65 grading categories and 20,000 serial numbers, as well as toll refining as an option to sell converters. 

Read More

Tags
Industry News
Metals Recycling
Paper Recycling
Plastics Recycling

​North American recycling industry reacts to rumours of Chinese scrap commodity import ban

ISRI held a teleconference for industry press on June 13th. The briefing followed two recent visits to China by the organization - to BIR's 2017 World Recycling Convention & Exhibition held May 22-24 in Hong Kong, and more recently to speak with U.S. and Chinese government authorities in Beijing to address industry rumours that have surfaced over the last several months about a potential ban on scrap imports to the country.

Read More

Tags
Electronics Recycling

Eco-friendly e-waste process facility underway

Mineworx Technologies Ltd., formerly Iberian Minerals Ltd., announced the joint collaboration with EnviroLeach Technologies Inc. for the construction of an environmentally friendly, modular E-Waste processing plant/facility. The E-Waste plant/facility has been designed to process up to 2,500 tonnes (5.5 million lbs) per annum of PCBA (printed circuit board assemblies) based E-Waste material.

Read More

Tags
Industry News

Recycling Cart Manufacturer Unveils Tilt Truck Line in HDPE Plastic

Recycling product manufacturer MODRoto, is now offering its entire line of tilt trucks in 100% virgin, high-density polyethylene (HDPE) plastic as standard at no extra charge. An upgrade versus tilt trucks molded from structural foam, blowmolded polypropylene and other plastic materials, the latest Poly-Trux(R) tilt trucks in HDPE are rotationally molded in a single leak-proof piece with sturdy, round corners and consistent wall thicknesses for structural strength and rigidity comparable to metal tilt trucks yet with resilience and flexibility to safely bounce back from sharp blows and heavy loads without cracking or distorting in shape.

Read More

Tags
Glass Recycling
Paper Recycling
Plastics Recycling

Penn Waste announces plans for $3.5 million single-stream retrofit

Penn Waste's single stream recycling system in Manchester, PA, supplied by BHS,  is expected to be operational in August of 2017,  increasing throughput to more than 45 tph and improving material purity.

Penn Waste has announced plans to add technology and capacity to the company's 35-ton-per-hour (tph) Single Stream recycling system housed in the company's 96,000-square-foot Manchester, PA Materials Recovery Facility (MRF). Eugene, Oregon-based Bulk Handling Systems (BHS) designed, engineered, manufactured and installed the advanced processing line in 2015, and will provide the $3.5 million retrofit.  Expected to be operational in August of this year, the new and improved system will increase throughput to more than 45 tph and improve material purity. 

Read More